High frequency vibrating screen is one of the most popular products in GN mining vibrating screen family. They are designed to separate the after-crushing material which contains solids of different size ranges. Under the help of this vibrating screen, the material are separated into oversize products and undersize products. They are called fine vibrating screens because they can separate the solids smaller than 200 microns.

GN has both single deck fine vibrating screens and multideck ones which are called stack sizers, both of which are equipped with vibrating motors with high frequency upto 25Hz, also, both of them are linear motional with dual amplitude.
GN high frequency fine vibrating screens have following features:

1.The vibrating motor’s frequency is 25HZ, and the motor’s rotating frequency is above 1500RMP.
2.The high frequency vibrating screens are located at a inclined angle for operating in order to achieve an ideal separating result.
3.The screen meshes are mostly flexible polyurethane screen meshes hooked from side, and the screen meshes’ opening rates are comparably much higher than the frame screen panels. Also, such screens have a long service life up to 6 months.
4.Those high frequency fine vibrating screens have a wide application for coal processing, mineral process and metal ores mining, and etc. They can serve for wet screens such as dewatering or classification and tailing.

GNFG series high frequency fine vibrating screens have been ideal choice for clients from tin mining, gold mining’s processing or tailing, coal mining and etc. In a recent project, the client is using GNFG-1028 with gold mining. A well designed and reliable machine can help client to save both gold and medium material, which means to save more money. Also, GNFG-1028 vibrating machines are designed to work continuously more than 310 days a year.

Welcome to contact GN directly for a formal quote or solution.

In the realm of international silica sand classification projects, GN’s cutting-edge equipment, the GNYK1028 Circular Vibrating Screen, stands out as a pinnacle of efficiency and reliability. Let’s delve into the distinctive features and technical prowess that make this equipment a game-changer.

Unveiling the GNYK1028 Model

Cutting-Edge Motorization

The GNYK1028 employs a single vibration motor, proudly branded as Martin. This motorization not only propels the screen with high shear force but also ensures prolonged operational periods without glitches.

Segmental Layout for Enhanced Performance

The shaker screen assembly is ingeniously arranged in multiple segments, delivering substantial processing capacity, high screening efficiency, and minimal power consumption. The modular design minimizes dynamic loads, simplifies operations, guarantees stability, and ensures durability with minimal maintenance requirements.

Adjustable Shaker Screen Assembly Angle

Ease and reliability define the GNYK1028‘s angle adjustment capability. To augment material screening, a re-slurry spray is introduced between each screen section, enhancing the overall screening efficacy.

Robust Construction for Longevity

The entire screen assembly undergoes comprehensive heat treatment, enabling it to withstand extended periods of high-intensity vibration. This feature ensures longevity even under the most demanding operational conditions.

Premium Electrical Components

Internationally acclaimed electrical components from Siemens or Schneider infuse the GNYK1028 with operational excellence, elevating it to the standards of reliability synonymous with GN.

Flexible Polyurethane Screen Mesh

A flexible polyurethane screen mesh, known for its elasticity and resistance to clogging, takes center stage in the GNYK1028. The ability to accommodate four to five screen meshes, coupled with low noise generation during vibration, sets this equipment apart.

Hassle-Free Screen Maintenance

Bolting the screen mesh using the pull-net bolt assembly ensures ease of operation, reliable fastening, and convenient inspection, disassembly, and installation procedures.

Surface Treatment for Longevity

The screen’s surface undergoes sandblasting and heavy-duty anti-corrosion paint application. To protect the contact surfaces with materials, a wear-resistant and anti-corrosive layer of polyurethane resin or adhered wear-resistant rubber sheets is applied, significantly extending the equipment’s lifespan.

In conclusion, GN’s GNYK1028 Circular Vibrating Screen emerges as a testament to innovation in silica sand classification, offering unparalleled performance and durability for international projects.

As the global demand for gold continues to rise, the need for efficient and reliable screening equipment in overseas gold mines becomes increasingly crucial. In response to this demand, GN Solids Control Machinery has introduced the GN High-frequency Fine vibrating Screen, a cutting-edge solution that combines advanced mechanical principles with unparalleled market advantages.

The GN High-frequency F ine vibrating Screen stands out in the market due to its innovative design and superior performance. Utilizing high-frequency vibration, this equipment effectively separates materials with different particle sizes, ensuring the efficient processing of gold ore. The high-frequency vibration not only increases the screening efficiency but also enables the equipment to handle large capacities, making it ideal for the rigorous demands of overseas gold mines.

Moreover, the GN High-frequency Fine vibrating  Screen is built with durability and reliability in mind. Its robust construction and high-quality materials allow for continuous operation in harsh mining environments, minimizing downtime and maintenance costs. This reliability is a significant advantage for overseas gold mines, where operational efficiency is paramount to success.

In addition to its exceptional mechanical features, the GN High-frequency Fine vibrating  Screen offers distinct market advantages that make it the top choice for overseas gold mines. Its compact design and easy installation allow for seamless integration into existing processing plants, saving both time and resources for mine operators. Furthermore, the equipment’s energy efficiency and low carbon footprint align with the sustainability goals of many overseas mining operations, contributing to a more responsible and eco-friendly approach to gold production.

In conclusion, the GN High-frequency Fine Screen is a game-changer for overseas gold mines, combining advanced mechanical principles with unparalleled market advantages. Its high-frequency vibration, durability, reliability, and market-friendly features make it the ideal solution for efficient and sustainable gold ore screening. With the GN High-frequency Fine vibrating  Screen, overseas gold mines can enhance their operations, improve productivity, and meet the growing global demand for gold with confidence and success.

Shale shakers and hydrocyclones are both components of solids control equipment used in many industries, such as oil and gas drilling, coal bed methane (CBM), horizontal directional drilling (HDD), diamond drilling, water drilling. They used to separate drilling cuttings for first phase cleaning in a whole solids control system. They are also both used for mineral processing for classification or dewatering based on the materials’ particle sizes.

1. Shale shaker or vibrating screens:

In a solids control system, once processed by the shale shakers, the drilling fluid is deposited into the mud tanks where other solid control equipment begins to remove the finer solids from it. The solids removed by the shale shaker are discharged out of the discharge port into a separate holding tank where they await further treatment or disposal.

A vibrating screen is a key piece of equipment in mineral processing. It’s used to separate feeds containing solid and crushed ores down to less than 200 μm in size. The vibrating screens take a tough job and also responsible for the heaviest burden for separation.

2. Hydrocyclones

Hydrocyclones are a type of cyclonic separators that separate product phases mainly on the basis of differences in gravity. They are used with aqueous solutions as the primary feed fluid1. Unlike dry or dust cyclones, which separate solids from gases, hydrocyclones separate solids or different phase fluids from the bulk fluid.The hydrocyclone separator uses pressure created by a centrifugal pump or hydrostatic head to generate centrifugal force and flow patterns within the hydrocyclone. It does not have any moving parts.

Hydrocyclones have different sizes, in a solids control system, the most popular 2 sizes are 10 inch and 4 inch diameters. For mineral processing, larger sized hydrocyclones are adopted.

3. In practice, the shale shakers are more efficient than hydrocyclones, and also consumes less power. That’s why more and more end users would like to replace the hydrocyclones by shale shakers, but there is a challenge that the cut point of shakers are not easy to become so small. Now GN high frequency fine sizer series vibrating screens can solve this problem by using flexible polyurethane screen meshes with fine apertures.

Welcome to contact GN for more information.

Indonesia is a country in South East China with a rich reservation of crude oil, and the oil drilling industry is quite active there. At first, years ago, all drilling companies are only buying from US or European companies for the equipment used in drilling procedures. But now, lots of them are turning to Chinese manufacturers like GN Solids Control, one of the leading international brands.

GN Solids Control has been manufacturing the solids control equipment for more than 16 years, and has exported to more than 70 countries in the world from its headquarter in China, and the branch companies in USA, Australia and Russia.

In a recent project, a client from Indonesia ordered a batch of solids control system from GN for 4 drilling rigs. They are following:

1.Shale shaker. Shale shakers are the first step solids control to remove particles above 100 microns from drilling fluids.

2.Desander cones, Desander are 10 inch cyclones with underflow shaker to remove particles larger than 40 microns. For this Indonesia project, GN offered a small sized underflow shaker. The underflow shakers for cyclones are used for the weighted mud.

3.Desilter cones, they are cyclones of 4 inch diameter for removing the 20+ micron particles from the drilling mud. They share the same working principle like the deander cones. Those desilter cones are also equipped with underflow screens.

4.Mud guns and mud agitators. They are auxiliary equipment for the whole solids control system but quite necessary. They prevent the mud from settling down to the bottom of tank.

Besides the single equipment, GN also has the ability to design or customize the whole system for clients. Welcome to contact GN for more information. And also welcome to visit GN Companies in China, USA, and Australia.

When you open this page, you might be attracted by the large linear vibrating screen in this picture. This picture was taken during the factory test in GN workshop before delivery, and after the strict QC inspection, it was taken to the client’s mining plant for the iron ore separation. Here is the links of load-operation at jobsite.

About GN Separation: GN Separation is the sister company of GN Solids Control, one of the leading brands for industry separation solution providers and equipment manufacturers who is mostly focusing on the separation solutions in oil and gas industry, like the drilling solids control systems, the drilling waste management solutions and the oily sludge treatment in a refinery plant. GN Separation is another brand in GN Group, who is also a professional solution provider for separation in environment protection industry, water treatment solutions and also the mining industry.

Mining vibrating screens are one of the core products GN Separation designs and manufactures, and the large linear vibrating screen is one of the 3 types:

1.Large vibrating screens. GN Large vibrating screens are designed for various applications including coal mines, mineral mines, metal mines and also sand and aggregates. In fact, it is mainly based on the requested capacity to see if the client should choose a large vibrating screen. GN has three types of large vibrating screens, large linear motion vibrating screen, large banana vibrating screen and large flip-flow vibrating screens.

2.Middle sized linear motion vibrating screens for classification and dewatering. The structure of the middle sized screens are quite similar as the large linear motion vibrating screens, just smaller in size. And based on the 2 main different applications, GN designed them with a bit differences for a better performance for classification and dewatering.

3.High frequency fine sizers. This type of screens are comparably smaller in size, but they have higher frequencies for fine separation. Besides, they are also equipped with flexible screen meshes instead of screen panels.

Welcome to contact GN directly for more information.

In the fields of physical separating, the decanter centrifuges always play an important role. They are widely used in different industries, such as drilling of crude oil and gas, the waste water treatment, mining tailing, food and beverage industry, edible oil clarifying and animal waste treatment and etc. And chemical plant is another industry using decanter centrifuges. It is really not easy to cite out all the industries which are in need of decanter centrifuges. It is true that centrifuges are so useful and therefore, popular.

As one of the leading separation solution providers, decanter centrifuge is one of GN Separation’s core products, among the shale shaker, desander cyclones, desilter cyclones, vertical cuttings dryer, three phase decanter centrifuges, and various pumps. In a word, GN Separation is designer and manufacturer for the separating and conveying equipment, and decanter centrifuge is one of them which can better show a manufacturer’s fabricating capability.

GN Separation Equipment Co. Ltd is located in Hebei Province, China, which is of 2 hours drive from Beijing Airport. It has a large factory workshop of 80,000 square meters, equipped with robot cutting and welding machines, and the for the decanter centrifuges, there are high speed balancing machine and middle speed balancing machines. Each rotating part shall of the centrifuge, like the propeller and bowl, shall be balanced on the balancing machines separately and assembled to ensure the performance.

In a recent project, an oversea client purchased a decanter centrifuge unit including following:

1.A decanter centrifuge GNLW364-VFD together with a VFD control panel. GNLW364 is a two phase decanter centrifuge with a centrifuge bowl of 14 inch diameter and a bowl length 4 times of the diameter. Comparably, it is a longer centrifuge with a clearer separation result. It is an ideal choice for the chemical industry. And its cutting point is from 2 to 5 microns.

2.A polymer dosing unit GNSJY3000, and a screw pump in a set for dosing. The polymer is employed to a centrifuge system when the particle sizes are too small for the decanter centrifuge. Because the polymer need some time to be ready, an automatic dosing is a must here.

Drilling waste management system can be divided into 2 kinds when there is a drilling rig for oil and gas. It depends on the procedure of the rig’s solids control system and also the components used during drilling. When there is a drilling rig, there must be some drilling fluids cycling in a system, which is called a solids control system. Just as its name, this system is used to control the solids content in the drilling fluids and to remove the waste particles as many as possible in order to make sure the drilling fluids to reach the standard for reuse. Those waste solids are sands and small stoned brought by the drilling bit from the underground, which are of different sizes. In order to remove them, the solids control system is designed into several stages based on a certain particle size range: shale shaker, desander, desilter and decanter centrifuge.

The shale shaker is the first stage, which is a physical separating with simple principle: vibrating. Normally, the shale shaker can remove particles larger than 100 microns. And the actual separating point is determined by the shaker screens’ API number, which is chosen by the end user. Of course, there is a curve between capacity and cutting point, the finer the separating result is, the smaller capacity it reaches. And it is the shale shaker which remove the most solids particles. But there is a problem, that the particles removed by the shale shakers are still too wet, containing a certain amount of expensive drilling fluids. That’s why it is necessary to have some further treatment of the drilling cuttings from the shale shaker.
Besides the complete solids control system, GN Solids Control also provides professional solutions for drilling cuttings waste management. Just recently, an European client purchased such a system including following:

1.Cuttings feeding section: this section is used to collect the wet cuttings from the shale shaker and feed to the first stage of separating in a waste management system.

2.High G drying shaker section: it is especially designed for the water based mud, it looks similar as a normal shale shaker but with a higher G force.

3.Vertical cuttings dryer section: a vertical cuttings dryer serves same function as a high G drying shaker for the drilling cuttings under condition when oil based mud is used in the drilling system.

4.Screw Conveyor section: this section is used flexibly for transportation purpose between the treating equipment.

In this case, even when the drilling site uses both WBM and OBM, the waste management sections can be used flexibly.

In the coming week, the SMOPYC will start on 22nd and will last for 4 days. More than 1000 companies and brands will have a show there. GN Separation is one of them.

About SMOPYC:
The full name of SMOPYC is Show for Public Works, Contruction and Mining Machinery. It is one of the largest industrial exhibitions in Europe, with an equal status as BAUMA in Germany, which is also held every three years. Besides the exhibitors, there will be more than 50000 visitors heading for the ZARAGOZA City for the exhibition.

About GN Separation:
GN Separation is a Chinese brand, a professional solution provider and equipment manufacturer from China.Together with its sister company GN Solids Control, GN Separation has sold its products to more than 70 countries in the world. GN’s equipment are mainly for 3 industries: oil and gas, envrionment protection and mining. This time, for SMOPYC, GN is focusing on mining.
With a headquarter of 80,000 square meters factory, GN is making the international standard machines, and has set up branch companies in USA, Australia and Russia.

What will GN Show at SMYPOC:
This time, GN has brought to the SMOPYC a vibrating screen for classification. It is one model of GN Linear motional vibrating screens of middle size. For this model, GN can have both single deck ( for 2 products) and 2 deck (for 3 products) available. And besides the middle sized models, GN also makes the large sized ones like the large banana screens and large linear motion screens, both one deck and two decks available.

How to find GN Separation at SMOPYC:
Exhibition Address: A-2 Km, 311, 50012 ZARAGOZA, SPAIN
Exhibiting time: Nov. 22nd to 25th, 2023
GN Booth: C5-7, Hall 3

See you soon in ZARAGOZA.