Month: March 2016

GN Solids Control, a top manufacture of complete line of solids control equipment, manufactures and supplies 1 model of Mini Centrifuge.

 

In this article, we will mainly introduce the knowledge about this model of Mini Decanter Centrifuge.

1).Main Application

 

Firstly, we need to know this model of centrifuge is very mini.

l  Drum Diameter: 9inch;

l  Drum Length: 26inch;

l  Max Capacity: 40GPM;

l  Effective Capacity: 26GPM;

Compared with the other manufactures in China, the types of centrifuge that GN Solids Control could provide are the most complete, the range is from the max capacity 484GPM to the mini capacity 40GPM.

Mostly, the centrifuges with big capacity will be used in the Oil & Gas drilling field, mainly be used for treating the drilling fluids or treating the drilling waste management  and the price is expensive.

This model of Mini Centrifuge will be mainly used in the industries like “Mining Industry”, “Diamond Core Drilling”, “Industrial waste water treatment”, etc. As in these industries, the needed capacity is small, the Mini Centrifuge could perfectly meet the practical need and it is economical and practical.

 

2). Key Features

l  Effective Capacity: 26GPM;

l  Max Drum Speed: 5000RPM;

l  Typical Drum Speed: 3800/4500RPM;

l  Cut Point: 2-5μm；

 

Although it has a small footprint, it is still a high-speed centrifuge. The highest speed is 5000RPM and the cut point is 2-5μm. To the very fine solids particles, they could be perfectly separated out by this mini centrifuge.

 

For treating the industrial waste water, treating the drilling fluids in diamond core drilling, its powerful strength will be showed.

 

3). Key Advantages

l  Product performance has been tested: only in USA and Canada, GN has sold over 17 units of this mini centrifuge;

l  Centrifugal casting process with the drum, which is the best manufacturing process with the high-speed centrifuge;

l  All the electrical components and core parts all adopt the products from world-famous brands to guarantee the equipment quality and stable performance. Such as, the bearing are from SKF/NAG brand, the electrical components are from SIEMENS/SCHINEIDER.

 

Since established in2007 year, GN Solids Control has always followed the philosophy of “good quality & rational price”. Our Goal and Vision is to manufacture good products and create the value for clients.

 

Finally, if you want to learn more about the mud mixing system manufactured by GN Solids Control, welcome to visit our website and contact us.

Web：http://www.gnsolidsamerica.com

Email：usa@gnsolidscontrol.com

Recently GN shipped one set of 750HP drilling rig solids control system to our client in China. The main configuration is as below:

4 sets of mud tanks

2 sets of GNZS703E-HB linear motion shale shaker

1 set of GNZS752E-2S desander

1 set of GNZS752E-12N mud cleaner with desilter

1 set of GNLW452 decanter centrifuge

Solids control pumps for feeding the desander and mud cleaner

Mud mixing unit including hopper and mixing pump

Mud agitators and mud gun as required

Features of the system:

1. The solids control system including 4 phase cleaning solids control equipments, the first phase cleaning is by shale shaker, the 2nd phase is desander, the 3rd phase is desilter, the 4th phase cleaning is decanter centrifuge.

2 desander and desilter with bottom shaker screens for drying the discharged solids and recycle more useful drilling fluids. In some cases, the client will use desander, desilter without bottom shaker screens, by this way, it is very easy for overflow, then they use a separate shale shaker as the bottom shaker to use after desander and desilter.

3 Separate skid of jet mud mixer to increase the storage volume of the mud tanks, and it is flexible to connect with either tank.

4 The desander centrifuge will not work all the time, it will work temporarily when it is required to separate ultra fine solids, to keep the drilling fluids balance. GNLW452 centrifuge is the cost-effective model centrifuge with middle speed, it is mainly used to barite recovery.

Continue reading “Shipment of 750HP drilling rig solids control system”

GN Solids Control has been around on designing and production shale shakers, decanter centrifuges, mud cleaners, desanders, desilters and cuttings dryers for several years. All of GN solids control and oil sludge dealing with equipments or systems tend to be widely used in over sixty countries.
With the profound trustworthiness of GN Solids Control, GN also enjoy growing from a small businesses to a leading global nation during the fast development of solids control industry and essential oil sludge treatment industries.
GN Solids Control equipments are very well known in North America, many local drilling businesses are using GN shakers, centrifuges and cuttings dryers. GN equipments and drilling mud system are also very popular within Europe. Last year, GN Solids Control provided many turnkey mud systems for sludge separation. GN equipments will also be selling very well in The ussr.

Although Russia is struggling with the low oil price, the actual depreciation of Rouble assist to save cost when drilling from some degree. Most of the Ruskies drilling companies can still create profit when the WTI price are near 30 usd/barrel.
Within 2014, GN Solids Control established one Russia part company in Moscow. GN also has one Houston part company which is GN Solids America LLC. GN Solids Russia is devoted to supply the best products with the most competing price. Recently, GN Solids Control has provided many models of shakers and mud cleaners to Russia.
Within Russia market, GN Solids Control has many successful tasks using GN solids control and drilling waste management equipments. Many large businesses such as Baker Hughes are utilizing GN decanter centrifuges as well as cuttings dryers for essential oil base mud and produced base mud. Now GN Solids Control also focusing on developing water base mud separation.
GN modular decanter centrifuge and cuttings dryer are also using widely within Russia as well as some other nations. We believe more and more equipments to be used in Russia and UNITED STATES.

GN solids control will show at Expomin Congress 2016 mining exhibition in Santiago, Chile, we will show our advanced mining decanter centrifuge for diamond drilling waste water recycling. If you are interested to know more about our centrifuge performance and price, pls visit us at the show.
Expomin 2016 general information: ( www.expomin.cl )
Time: April 25~29,2016
Location: Santiago, Chile
Stand No.: 1018-2
To make an appointment with us, pls send your visit schedule to sales@gnsolidscontrol.com.
What equipments we will show?
Mini Decanter centrifuge GNLW223 for mining diamond core drilling waste water treatment, the purpose is to use less water to save the drilling cost, to be a responsible company for the environment after drilling, less the drilling waste and reduce the drilling waste treatment cost. Since the treating capacity required and floor area is both very small, and considering the budget limit, we choose the smallest model centrifuge for this application.

Continue reading “Mining centrifuge for Expomin 2016 in Chile”

Shaker screen is type of quick-wear part widely used on shale shaker in drilling process to remove out the cuttings from drilling fluids. There are many shale shaker manufacturers in the world, and in the mean while, they also provide the original shaker screens to matching their own shaker. However, to the screen user, to find a screen supplier who provides replacement screen with cost effective price would be the best choice, as the original shaker screens are always price higher.

All screen manufacturers may have different technology to fabricate the screen. From the wire mesh choosing to glue processing, almost every procedures are different technologies.

Then how a screen manufacturer makes replacement screen for other brands?

It is well known the shaker screens could be made as per Mesh No. and API No. Mesh No. is a designation of ASTM and ISO which means how many holes within one square inch. If you order the replacement screen by telling the Mesh number, it may lead to a mistake as different manufacturer use different diameter steel wires to weave the mesh surface. Though the mesh numbers are same, the size of the hole is different. Thus if you want to order screen by providing the mesh number, you also need tell what size particles you want to separate. It is also called separating point.

On the other hand, API number is a size span of microns; all sizes in this span are classified into one API No. A specified API number means 100% of solids with size in this span will go through the screen panel. On screen performance, API also defined the non-blanked area and conductance. API number is much acceptable to manufacturer when ordering the replacement screens.

Some buyer may bring some famous screen suppliers’ mesh number to other supplier for asking replacement screen price. It should be noted that mesh number only indicates the first top layer wire mesh performance. A better way is to provide the complete screen part number, and then screen manufacturer is able to find the corresponding API number. It will help both the user and supplier to avoid mistakes.

GN Solids Control is a professional manufacturer of drilling mud system and shaker screen. Our capacity of screen is around 5000 thousand piece each month. Replacement screen for many world famous brands could be found in GN’s production line. For more information, no hesitate to contact with us.

GN Solids Control is China primary manufacturer of mud solids control systems, drilling waste management, as well as high quality replacement shaker screen.
GN Solids Control makes a customized mud mixing system per client’s particular requirement. The system has been dispatched to the client 2 or 3 weeks ago. The barite mixing mud system includes down below equipment:
1 . Oilfield skid Mud tank. 1 program
It is a 20ft container measurement mud tank with a couple of compartments.
Each tank drawer is equipped with a mud gun. Totally 2 ea mud guns for the tank.
minimal payments Mud transfer pump one ea. It is a 11kw modest centrifugal pump. The pump can transfer the new combined mud to outside mud tanks or HDD drilling rigs, or drilling mud systems. Often the mud transfer pump will be mounted on the slope from the tank for compact design and style.

3. 1 ea mud mixing pump and 3 ea mud hoppers.
Typically the mud mixing pump will be the same type with produce pump. They are both centrifugal pump for easy to stock replacement parts.
The mud mixing pump and the mud hoppers are generally combined of a mixing model.
Client wants the unit competent to handle big bag system, they ask for the suspending device for bags. Hoppers are both down at the carpet. So GN Solids Control customized some other oil field skid to be able to mounted all the mixing product and the hanging device.
Typically the mixing pump for mud hopper is 45kw together with 3000-2000 l/min. Normally, its 1 ea mixing pump is with 1 ea mixing hopper. Why there are a couple of mud hoppers but only one ea mixing pump?
Since the polymers are in big totes, they need to hang the polymers bag on top of the mixing hopper when they want to blend polymers. But they do not desire to remove the polymer bag want to read want to add other compounds to the mud mixing system . In this case, many people request an extra mud hopper. When they want to add different chemicals, they can close typically the polymers mixing hopper, in addition to use the backup hopper.