Month: June 2017

GN solids control will participate the oil exhibition MIOGE next week in Russia, which is the largest oil show in Russian district, this is not the first time for GN to participate this oil show with our exclusive agent in Russia. We will show our core equipments during the show.

The general information of the MIOGE:
Show Name: MIOGE
Show time: June 27~30th, 2017
Stand No.:A239, hall 3
For more information, pls refer to http://www.mioge.ru

Main equipments showed:
1) Linear motion shale shaker
2) Linear motion mud cleaner

4) Shaker screens, all of them are composite material frame for longer working life compared with steel frame screens, we sold thousands of the replacement shaker screens for other brand shale shaker every month in Russia market.
5) Centrifugal type degasser, different with the traditional horizontal type vacuum degasser, the centrifugal degasser is vertical installed degasser, which needs smaller area to install on the mud tank and easy for maintenance.
During the past years, GN solids control has sold hundreds of these solids control system to our client in Russia, below is the case study for reference:
Solids Control Equipment sent to Russia for 10 Oil Rigs, including shale shaker GNZS593E-HB, decanter centrifuge GNLW363CG-VFD

http://www.gnsolidscontrol.com/drilling-fluids/solids-control-equipment-sent-to-russia-for-10-oil-rigs-there
Customized Shale Shaker and Mud Cleaner Unit to Russia Mud Service Company,

http://www.gnsolidscontrol.com/drilling-fluids/customized-shale-shaker-and-mud-cleaner-unit-to-russia-mud-service-company
Drilling Waste Management system to Russia, The drilling waste management system model No: GNCM-40A, 1 unit of Vertical cuttings dryer: GNCD930C-VFD, Waste management centrifuge: GNLW363CG-VFD, screw pump http://www.gnsolidscontrol.com/drilling-fluids/drilling-waste-management-system-to-russia
Containerized Drilling Waste Management System to Russia, http://www.gnsolidscontrol.com/drilling-fluids/containerized-drilling-waste-management-system-russia
Welcome to visit GN solids control at our stand to know more information.

GN solids control shipped one set of oil sludge treatment system to our Africa client last November, now the system has been set up in the client’s rig site in Uganda.

The oil sludge treatment system including:
1. shale shaker tank skid:
GNZS594E-LD High G drying shaker is 4 panel pretentioned shaker screen shale shaker, it is used for the drying of the cuttings/WBM/oil sludge and separation of the coarse solids from the oil sludge.The screen size is 585x1165mm, composite material shaker screens with stainless steel 304 wire mesh. The shaker is with hot water spray system to avoid the blocking of the oil sludge on the screen because of high viscosity.
2. decanter centrifuge with dewatering unit tank skid:
VFD decanter centrifuge with dewatering unit on the same mud tank skid, the 14 inch bowl decanter centrifuge is the best sold model centrifuge for oil sludge treatment system, Before feeding to the centrifuge inlet pipe, the heated oil sludge ( from the shaker tank) will be adding chemicals and mixed in static mixer then flow to the centrifuge feed pipe. After treatment of the decanter centrifuge, the fluids will be adding acid or alkali to adjust the PH value for safety disposal.
3. Acid & Alkali Liquid storage Skid
4. 3 phase separation system skid, it is also called oil water separator skid, including slant plate clarifier and oil water separator.The clean oil and clean water will be separated and storaged in the buffer tank.
5. Screw conveyor to transfer the discharge cuttings from shale shaker and decanter centrifuge
We have 10inch diameter, 12 inch, 14 inch, 16 inch screw convetor with different length for option, each section is 12ft length, you can choose 1 section, or 2,3,4 section according to the rig area dimension. The discharged solids will be transferred automatically by the augers to the waste container for disposal.

This week GN solids control shipped several sets of linear motion shale shakers to Russia, this is not the first order from this Russia client, they had orders huge qty equipments since last year.

The linear motion shale shaker is the 4-panel screen shale shaker with screen dimension 585 x 1165mm, composite material frame pre-tensioned shaker screens. GN shaker screen with 3 layers stainless steel 304 ( or SS316l) wire mesh for all the screens finer than API60. The composite material screen can be anti-corrosion and anti-rust for over 5 years storage. The screens can be also used for Swaco Mongoose or Meerkat shale shaker if the clients have these model shale shakers.
The linear motion shale shaker is more cost effective and common design all around the world, sometimes balanced elliptical motion or progressive elliptical motion shale shaker is required for some special drilling fluids.
We have several options for vibration motors, normally we use Italy Oli brand vibrators, for special required explosion proof standard like IEC ex, ATEX, GN will use either Italy Oli or US martin for option.

Except for linear motion shale shaker, GN solids control also sold a lot of linear motion mud cleaner with the same bottom shaker model, high speed decanter centrifuge, high G force vertical cuttings dryer to Russia, thousands of shaker screens are sold monthly for US brand shale shaker and Chinese brand shale shakers.
When using the linear motion shale shaker for oil based drilling mud, the operator can use different API mesh size to reach the drilling requirement which is different with water based drilling mud.
We also have high G force drying shaker for drilling waste management, the G force up to 8.0 G, with hopper feeder instead of weir feeder. If you need solids control equipments, pls contact with GN solids control.

The sludge separation system used in construction industry is used widely for water recovery and drying the waste cake. The waste water can be reused for construction industry to save water consumption cost. In some developed countries the waste sludge produced in construction industry is strictly controlled for disposal, so the moisture in the discharged cake should be as dry as possible. Also in some specified projects, huge amount water is required such as Tunneling, pilings, etc.

Recently we shipped a set of sludge separation system for construction industry to USA client, the configuration is as below:
Sludge collection hopper
High G drying shaker, 1 unit, up to 8.0G with 4 panel shaker screens, the screen dimension is 585x1165mm, with composite material shaker screens, right now we have some stocks of steel frame screens in Houston warehouse for sale, to get the price list, pls contact GN solids America.
Mud cleaner with 8 pcs desilter cones, the bottom shale shaker is same with the high G drying shaker model, with the same size shaker screens.

The big bowl big treating capacity GNLW553-VFD decanter centrifuge, with 22 inch bowl diameter and 71 inch bowl length, this is not the largest centrifuge GN produced, we also have 30 inch bowl centrifuge, with max treating capacity 200m3/h, it is suitable for big tunneling project.
Mud tanks with tank accessories
Centrifuge feeding pump and telescopic skid

Based on the waste water treatment standard, chemical dosing system is required before feeding to the decanter centrifuge, so it can separate the cut point up to 1 microns.
Continue reading “Construction sludge separation system”