Author: desanderdesilter

After 40 days manufacturing time, GN hdd drilling mud tank is ready for delivery for Middle East client. When doing some pipelines projects without digging the road, much better for passing vehicles, hdd drilling rig and HDD mud system is necessary. The two sets mud tank system will be used for Horizontal directional drilling contracts from local government, mud tank system including below items:

1) shale shaker.  Shaker is the first stage of solid control sytem. GNZS703 shaker is 3 panel shaker. The 3 panel shale shaker will be used to separate the big solids, or sands from the drilling mud, treating capacity 500gpm. The carbon steel shaker screen is durable for HDD projects, may just require 30pcs to 80pcs shaker screen in stock as per the contracts features.

2) mud cleaner. Mud cleaner is the second phase solids control equipment. After treated by shale shaker, the drilling mud will be pumped to mud cleaner by centrifugal pumps.  After treated by mud cleaner, most particles up to 25 microns can be removed. This standard drilling mud without big particles is OK for HDD projects. However, in some special cases or some government project, decanter centrifuge will work as the 3nd stage for further treatment of the drilling mud to make it cleaner.

3) This client also bought one sets middle speed centrifuge with centrifuge skid and feed pump as extra package. We already start the arrangement for the clients and will ship them later with full container for better protection.

Except for mud tank system, GN Solids Control can also offer all line of solids control equipment, from shaker, mud cleaner, shaker screen, centrifugal pump, submersible slurry pump, pit pump, decanter centrifuge, centrifuge feeding screw pump, shear pump, mud agitator, mud gun, mud tanks etc. If you need any solids control equipment, pls contact us freely. We are having OTC oil show in May, 2016. Pls make an appointment if you come to the show.

After 3 year’s production and development, GN second new factory officially put into use, the main production line is decanter centrifuge and vertical cuttings dryer, which are also our main products in the recent years. The manufacturing capacity will be increased a lot after it is usage, we can produce about 300 units of decanter centrifuge and 100 units of vertical cuttings dryer per year. This factory is close to the first new factory, only 2km far away, it is convenient for the client to visit and look around the both factories, and check all the equipments production.

The first new factory will mainly focus on the traditional solids control equipments manufacturing, like shale shaker, mud cleaner, vacuum degasser, desander, desilter, mud agitator, mud tank package, etc.

Except for the second new factory, GN solids control also establish branch companies worldwide, including US branch in Houston, TX and Russia branch in Moscow, also we develop representative agent in Middle east, South America and Australia. We have got API , ISO, CE, CU-TRU ,etc certificates, especially GN brand decanter centrifuges have been used widely in domestic and abroad market, and get approval and long term cooperation agreement with international oilfield service companies.

Below are some photos taken in our second new factory:

We have lot of decanter centrifuges and vertical cuttings dryer in stock for client’s urgent requirement, they are the main equipments for drilling waste management system, there are more and more requirements for drilling waste management solutions from international and domestic market. We provide various solutions for different projects, as high speed decanter centrifuge, middle speed decanter centrifuge, variable speed centrifuge, and all of them will be made to comply with specific explosion proof standard. Continue reading “GN second New factory put into use successfully”

GN solids control just finished the mining exhibition successfully at EXPOMIN 2016 in Santiago, Chile last week, we displayed the baby centrifuge at the show, this is the first time for GN to attend EXPOMIN together with our exclusive representative SL Group oil & Mining solutions. A lot of clients showed their interests to our baby centrifuge, which is specially designed for diamond core drilling. We introduce the mini mining centrifuge to the mining market with the purpose as below:

1 reduce water consumption , especially when water is very expensive

2 Reduce total drilling cost

3 Save the total cost of solids disposal

4 Environmental friendly, to be a responsible company to the local resident

In some sites only a baby decanter centrifuge is not enough, we need the baby shale shaker to separate the big rocks firstly and reduce the solids content and make the solids dryer, so the centrifuge can work better and the solids discharged will be much drier. The humidity of the discharge solids can be adjusted by the adjustment plate on the big end of the mini centrifuge easily.

The dryness of the mud cake is acceptable by most of the clients, they can use the truck or cuttings box to transfer the solids directly or dump them directly. The discharged fluids will be reused to save the cost. The water is not clear enough for drinking, the separation cut point is 2~5 microns, most of the solids smaller than 2 microns will remain in the water.

The complete solids removal unit is also welcomed by the potential clients, they like the compact design much. We have the baby centrifuge in stock in Santiago for sale, and not only for sale, we also provide rental service for short period projects. Continue reading “GN baby centrifuge for mining showed at EXPOMIN 2016 in Santiago, Chile”

GN Solids Control is usually leading manufacturer of shale shaker, centrifuge, vertical dryer, mud agitator, shear pump, mud mixing system, Mud Gas Separator etc… all line of solids control and all line of drilling waste management equipment. To present better support to end consumer client, we stock a lot of solids control equipment coming from last year. But now the essential oil industry is drilling down and all sorts of equipment is stock there. To be able to sell them soon along with recycle the cost, the price is more preferable now to both the actual client and GN Solids Control.

GN Solids Control as the first China API certified supplier, GN Solids Control product is with high top quality and good price. In addition to, GN centrifuges and usable cuttings dryers and mud agitators have been tested by means of many international oil drilling companies or oil services companies.

1) If you want to get more information on GN solids control gear, pls visit GN Solids Control at CIPPE olive oil show, or at NON-PRESCRIPTION oil show, or on Iran oil show. You will take our solids control equipment there to meet a lot more clients. CIPPE oil present is coming at 29 to be able to 31, March 2016. OVER THE COUNTER oil show is coming in 2 to 5, May 2016 and Iran oil indicate is also coming at May possibly. Pls contact us if you want to appear. Pls send email for you to: roy@gnsolidscontrol. com .

2) In case you have enough time, we also pleasant you to come to GN manufacturing. Our factory is close to Beijing, Capital of China. We can easily arrange hotel accommodations, air port pickup for clients. With GN factory, we can communicate more at GN solids control office, visit GN fabrication workshop, GN share house…etc.

3) With the sector becoming warmer, more and more customer starts to inquiry regarding centrifuge. Especially centrifuge to get solids control mud system or drilling waste management. The 14inch bowl measurement mud treatment centrifuge, it is equivalent to US brand centrifuge and have a good market share by now. Pls contact us freely if you want some solids control products.

GN Solids Control Company is ready to distribution one set 750Hp computer drilling mud system to customer. The client is local clientele focus on oil drilling sector. GN Solids Control have touch with them for over some years. And the client only purchase small items in prior years to test the quality of GN product. The small items include things like one set shaker, a few shale shaker screens, some value packs of mud agitator, several centrifugal pumps etc . Finish of last year, the client relieve big order for full set of 750hpr rig drilling mud system.
The solids control mud cleaning system including beneath items.
1) 4 units 40ft container size mud tank.
1 set mud tank as mud recycling where possible tank, 1 set mud tank as mud mixing system tank and the other a couple of tanks as mud safe-keeping tanks. The container dimension tank with locking pit is easy for transportation through 40feet long vehicles.

2) 2 sets GNZS703E-HB shale shaker
Your client chooses to use 3 panel shakers to save cost about shaker screen utilize. That model shaker is also older product and has been discussing oil drilling for over your five years, quality is very very good and feedback is always satisfied.
3) 1 set GNZJ752-2S mini desander & a single set GNZJ752-12N mini desilter
GN mini desander as well as desilter is combination of little shaker (GNZS752 mini shale shaker) with desander cones or desilter cones. The particular mini unit is very sleek and stylish and cost-effective.
4) GNLW452C decanter centrifuge
GN decanter centrifuge is usually popular at solids control field and drilling squander management field. With more than 200sets centrifuge sales quantity, GN decanter centrifuge will be occupy more market share coming from US/Europe brand.
Other solids control product including: mud hopper, mud agitator , centrifugal pump, and so on If you already have complete pair of mud system and need to switch the old products, pls in addition contact us and we can provide almost all replacement items for consumers.

Recently we shipped 2 sets of linear motion shale shaker and 1 set of linear motion mud cleaner to Middle East. This is a 2 mud tank system, one mud tank is with only one unit of linear motion shale shaker, the other tank is with 1 unit of linear motion shale shaker and 1 unit of linear motion mud cleaner. The processing rate of the system is 500gpm. This is not our standard design, this is customized design for the slow oil industry client.

GN mud recycling system/ solids control system can be applied for all kinds of drilling when you need to clean and reuse the drilling mud. We are the drilling fluids cleaning and disposal specialist for water based mud, oil based mud and synthetic based mud.

We have supplied solids control equipments, drilling waste management equipments and mud recycling system to middle east clients in the past years. Sometimes they will buy the equipments from us only, and make the mud tank locally to save freight cost. Some clients need a mud system easily movement, they will buy the skid mounted mud tank from GN, and installed in on their own trailer, together with the other components, for example, generator, pipelines, transfer pumps.

The second mud tank with a centrifugal pump as transfer pump,The first mud tank with 3 sets of centrifugal pump, 2 of them as feeding pump of the desander cone and desilter cone, 1 as the mixing pump with the mixing hopper unit and shearing unit.

If you need a mud recycling system for water well drilling/ water injection well drilling, geothermal well drilling, diamond core drilling, Coal bed methane drilling, Horizontal directional drilling, shallow oil & gas drilling, deep water drilling, deep oil drilling, pilings, Tunneling, construction work, etc, pls contact with GN solids control.

Recently we shipped 3 phase cleaning mud recycling system for no-dig projects again, we ever shipped the same mud system to the largest pipeline crossing contractors last year.

The 3 phase cleaning mud recycling system is different with the traditional 3-phase cleaning system- shale shaker as the first phase cleaning, desander cone as the second phase cleaning desilter cone as the third phase cleaning. Our system with desander cone as the first phase cleaning, desilter cone as the second phase cleaning, middle speed decanter centrifuge as the third phase cleaning. This is mainly used for drilling fluids with low gravity solids. Along with the drilling depth and time, the ultra fine solids accumulated in the drilling fluids which can not be separated by the desilter cone, middle speed decanter centrifuge is used to reduce the solids content in the drilling fluids for reuse the drilling mud, otherwise it can not meet the drilling required technical parameters.

We also have high speed decanter centrifuge and variable speed centrifuge for option, why we use middle speed decanter centrifuge only? Because the middle speed decanter centrifuge with separation point 5~7 microns which is enough for the HDD application, and the price is much cheaper compared with the high speed decanter centrifuge.

The container sized frame on top of the 20ft standard container size mud tank for convenient movement between different jobsites. Both of the desander and desilter  with bottom shale shaker for drying the discharged solids and recycle more useful drilling fluids.

Continue reading “3-phase cleaning mud recycling system for No-dig projects”

GN Solids Control, a top manufacture of complete line of solids control equipment, manufactures and supplies 1 model of Mini Centrifuge.

 

In this article, we will mainly introduce the knowledge about this model of Mini Decanter Centrifuge.

1).Main Application

 

Firstly, we need to know this model of centrifuge is very mini.

l  Drum Diameter: 9inch;

l  Drum Length: 26inch;

l  Max Capacity: 40GPM;

l  Effective Capacity: 26GPM;

Compared with the other manufactures in China, the types of centrifuge that GN Solids Control could provide are the most complete, the range is from the max capacity 484GPM to the mini capacity 40GPM.

Mostly, the centrifuges with big capacity will be used in the Oil & Gas drilling field, mainly be used for treating the drilling fluids or treating the drilling waste management  and the price is expensive.

This model of Mini Centrifuge will be mainly used in the industries like “Mining Industry”, “Diamond Core Drilling”, “Industrial waste water treatment”, etc. As in these industries, the needed capacity is small, the Mini Centrifuge could perfectly meet the practical need and it is economical and practical.

 

2). Key Features

l  Effective Capacity: 26GPM;

l  Max Drum Speed: 5000RPM;

l  Typical Drum Speed: 3800/4500RPM;

l  Cut Point: 2-5μm；

 

Although it has a small footprint, it is still a high-speed centrifuge. The highest speed is 5000RPM and the cut point is 2-5μm. To the very fine solids particles, they could be perfectly separated out by this mini centrifuge.

 

For treating the industrial waste water, treating the drilling fluids in diamond core drilling, its powerful strength will be showed.

 

3). Key Advantages

l  Product performance has been tested: only in USA and Canada, GN has sold over 17 units of this mini centrifuge;

l  Centrifugal casting process with the drum, which is the best manufacturing process with the high-speed centrifuge;

l  All the electrical components and core parts all adopt the products from world-famous brands to guarantee the equipment quality and stable performance. Such as, the bearing are from SKF/NAG brand, the electrical components are from SIEMENS/SCHINEIDER.

 

Since established in2007 year, GN Solids Control has always followed the philosophy of “good quality & rational price”. Our Goal and Vision is to manufacture good products and create the value for clients.

 

Finally, if you want to learn more about the mud mixing system manufactured by GN Solids Control, welcome to visit our website and contact us.

Web：http://www.gnsolidsamerica.com

Email：usa@gnsolidscontrol.com

Recently GN shipped one set of 750HP drilling rig solids control system to our client in China. The main configuration is as below:

4 sets of mud tanks

2 sets of GNZS703E-HB linear motion shale shaker

1 set of GNZS752E-2S desander

1 set of GNZS752E-12N mud cleaner with desilter

1 set of GNLW452 decanter centrifuge

Solids control pumps for feeding the desander and mud cleaner

Mud mixing unit including hopper and mixing pump

Mud agitators and mud gun as required

Features of the system:

1. The solids control system including 4 phase cleaning solids control equipments, the first phase cleaning is by shale shaker, the 2nd phase is desander, the 3rd phase is desilter, the 4th phase cleaning is decanter centrifuge.

2 desander and desilter with bottom shaker screens for drying the discharged solids and recycle more useful drilling fluids. In some cases, the client will use desander, desilter without bottom shaker screens, by this way, it is very easy for overflow, then they use a separate shale shaker as the bottom shaker to use after desander and desilter.

3 Separate skid of jet mud mixer to increase the storage volume of the mud tanks, and it is flexible to connect with either tank.

4 The desander centrifuge will not work all the time, it will work temporarily when it is required to separate ultra fine solids, to keep the drilling fluids balance. GNLW452 centrifuge is the cost-effective model centrifuge with middle speed, it is mainly used to barite recovery.

Continue reading “Shipment of 750HP drilling rig solids control system”

GN Solids Control has been around on designing and production shale shakers, decanter centrifuges, mud cleaners, desanders, desilters and cuttings dryers for several years. All of GN solids control and oil sludge dealing with equipments or systems tend to be widely used in over sixty countries.
With the profound trustworthiness of GN Solids Control, GN also enjoy growing from a small businesses to a leading global nation during the fast development of solids control industry and essential oil sludge treatment industries.
GN Solids Control equipments are very well known in North America, many local drilling businesses are using GN shakers, centrifuges and cuttings dryers. GN equipments and drilling mud system are also very popular within Europe. Last year, GN Solids Control provided many turnkey mud systems for sludge separation. GN equipments will also be selling very well in The ussr.

Although Russia is struggling with the low oil price, the actual depreciation of Rouble assist to save cost when drilling from some degree. Most of the Ruskies drilling companies can still create profit when the WTI price are near 30 usd/barrel.
Within 2014, GN Solids Control established one Russia part company in Moscow. GN also has one Houston part company which is GN Solids America LLC. GN Solids Russia is devoted to supply the best products with the most competing price. Recently, GN Solids Control has provided many models of shakers and mud cleaners to Russia.
Within Russia market, GN Solids Control has many successful tasks using GN solids control and drilling waste management equipments. Many large businesses such as Baker Hughes are utilizing GN decanter centrifuges as well as cuttings dryers for essential oil base mud and produced base mud. Now GN Solids Control also focusing on developing water base mud separation.
GN modular decanter centrifuge and cuttings dryer are also using widely within Russia as well as some other nations. We believe more and more equipments to be used in Russia and UNITED STATES.