Author: desanderdesilter

GN solids control will show shaker screens at Future Energy Asia 2018, shaker screen is our major products among the solids control equipments and drilling waste management equipments line.

We can produce durable composite material frame shaker screens for our own brand shale shaker , also for the world famous brand shale shaker. Like replacement shaker screens for Derrick FLC 500 series, FLC 58-30, 600, hyperpool, Swaco Mongoose, MD-2/3, Brandt Cobra / Venom, VSM300, FSI, etc.
Compared with steel frame shaker screens, the composite material frame shaker screens can use longer time, the storage can be up to 5 years, and the effective screens area is 20% longer, the 3 layers wire mesh is more stable compared with 2 layers wire mesh, which also longer the working life.

Except for shaker screens, we also produce linear motion shale shaker, linear motion mud cleaner, high speed decanter centrifuge, VFD decanter centrifuge, middle speed decanter centrifuge, vacuum degasser, centrifugal degasser, mud gas separator, high G drying shaker, centrifugal pump, submersible slurry pump, vacuum pump, vertical G dryer, screw conveyor, disc centrifuge, oil gas separator, mud tank system, mud agitator, mud gun, mixing hopper, flare ignitor, etc. equipments, we provide customized solids control system and drilling waste management system and oil sludge separation system for oil field, also the liquid solids separation system for industry waste water, also the mud cleaning and mixing system for HDD & CBM. Continue reading “GN will show shaker screens at Future Energy Asia 2018”

This week we shipped 2 units of mud recycling & mixing system to India HDD contractor. This is the repeat order from the same client, why it is necessary to use the mud recycling & mixing system?
1) Reuse the drilling fluids to prepare for new drilling fluids, save the drilling cost for the HDD contractor

2) Reduce the drilling waste and reduce the influence to the environment, reduce the cost to treat the drilling waste
3) Multi function mud system with recycling, mixing, enough storage
4) A good mud recycling system can lubricate the HDD machine and protect the HDD machine, the working life of the HDD machine can be longer
The technical configuration is as below:

1) 10ea desilter cone installed on top of the double deck shale shaker as 2 phase cleaning equipments, the bottom deck worked as coarse solids shale shaker which is the 1st phase cleaning, the top deck worked as mud cleaner to treat the fluids dropped from the desilter cone to recover more useful drilling fluids and the discharged waste could be drier.
2) The centrifugal pump is 100% interchangeable with Mission Magnum centrifugal pump, the impeller and pump casing material is hard ductile iron alloy for abrasion resistance.
Continue reading “2 units of mud recycling & mixing system shipped to India”

As the branch company of GN solids control in Houston, USA, GN solids America have many shaker screens in stock for immediate shipment, this week we ship another 3 container shaker screens to USA for the clients in North America and South America. Except for shaker screens, we also have linear motion shale shaker, linear motion mud cleaner, VFD decanter centrifuge, vertical cuttings dryer, centrifugal pump, spare parts in stock there for solids control, drilling waste managements, waste sludge treatment and other customized design solids liquid separation system. Welcome to contact with GN solids sale engineer for more information.

We are OEM manufacturer of shaker screens for our own shale shaker, also we can produce replacement shaker screens for other famous brand shale shaker, all of the screens are durable composite material shaker screens for longer working life and better separation performance. Our screens has passed the API RP13C test port by API authorized lab in USA. The correct API configuration can help the mud engineer to make a correct design of screen API NO. to control the drilling fluids.

Compared with the traditional steel frame shaker screens, the composite material shaker screen will last longer time and with larger effective screen area, the storage of the composite screens is up to 5 years without getting rusty. The 3 layers wire mesh also ensure the longer working life. Every month we shipped thousands of shaker screens to over 70 countries in the world for both oil industry, mining industry and HDD & CBM industry. Especially in America market, our screens have been proved by many sites, the client repeat order frequently.

Continue reading “Shaker screens in stock in Houston”

This week GN solids control shipped one unit of 4 phase cleaning HDD mud recycling system to Sinopec. Normally the HDD mud recycling system is with 2 phase cleaning or 3 phase cleaning, this system is customized for 4 phase cleaning.
The system is consist of the parts below:

1) 1 unit of linear motion shale shaker GNZS703F-DZ installed with 3pcs of composite material shaker screens for free, 2 units of Italy Oil brand vibration motors with max G force 7.5G, which is adjustable.
2) 1 unit of linear motion mud cleaner GNZJ703F-1S8N with 500gpm treating capacity with 2 units of centrifugal pumps as feeding pump of desander cone, desilter cone. The underflow shale shaker model is same with the shale shaker GNZS703F, same dimension shaker screens.

3) 1 unit of VFD decanter centrifuge GNLW363C-VFD, with non explosion proof VFD control panel to adjust the frequency to adjust the rotary speed of the centrifuge, it can control the flow rate by adjust the speed. Vertical submersible slurry pump is installed on the mud tank as feeding pump of decanter centrifuge. One set of screw conveyor is installed to transfer the solids from the centrifuge discharge port to waste container. It is an automatically operation system and no need worker to watch for it time and time.
4) 2 mud tanks with same dimension for convenient shipment, the shale shaker and mud cleaner are equipped in a same dimension frame, which can be put on the same trailer for movement.
Continue reading “4 phase cleaning HDD mud recycling system to Sinopec”

This week one unit of containerized 15 m3/h oil sludge separation system to Europe client.
The configuration consists of 5 modulars:

1) Pre- mixing tank: the pre mixing tank is necessary, it will influence the result of the equipments next, like shale shaker tank, decanter centrifuge tank, disc centrifuge tank.
2) Shaker tank: the shale shaker with mud agitator installed on top of the mud tank, heating lines around the tank to increase the oil sludge flowability and increase the decanter centrifuge separation performance.

3) 2 phase separation tank : the 22 inch decanter centrifuge installed on top of the tank, the screw pump installed on the same skid, and the screw conveyor collect the solids from the solids discharge port of the decanter centrifuge and transfer outside the container.

4) 3 phase separation skid ：the disc centrifuge installed on the skid, the fluids discharged from the centrifuge fluids port flow to disc centrifuge, the clean oil and water will be pumped to separate oil tank and water tank.
5) Chemical dosing system: the chemical dosing system with 3 mixing tank chemical dosing system, and the coagulation system, each tank with chemical dosing pumps.
The oil sludge separation system is used in cold area, so all of the equipments are installed inside the 40ft container to keep it warm. We also consider the operation convenience for the user.
This is the repeat order from the same client, they bought one unit of 1 m3/h oil sludge separation system several month ago, and satisfied with the result.
Except for oil sludge separation system, GN solids control also provide good quality solids control system, drilling waste management system, we will send the question list to the client to know the project information firstly, then we will design customized system for our clients.

2 sets of oil sludge separation system are finished production in GN solds control, one system with grey silver color is 2 m3/h oil sludge treatment system , the other one is 15 m3/h oil sludge treatment system, which will be released next week.

The 2 m3/h oil sludge treatment system is a trial order for the client, if it works well, the client will repeat order for a bigger one, GN standard and customized oil sludge separation system has been proved the performance.

The technical configuration is as below:
1) Pre-mixing tank
Premixing tank is the necessary part of the oil sludge separation system, the sludge vacuum pump transfer the oil sludge from the waste pit to pre mixing tank for heating, agitating, chemical jetting, without proper premixing, the fluids flowrability will be increased, the separation result will be better.

2) Classification modular, the oil sludge from pre mixing tank will be transferred to V tank bottom which with screw conveyor on the bottom, after classification, the top layer will flow to disc centrifuge, the bottom layer will be washed, chemical jetting and transferred to solids control manular.

3) Solids control modular: it consists of shale shaker and 2 phase decanter centrifuge for liquid solids separation. The clean fluids separated from 2 phase decanter centrifuge will also flow to disc centrifuge modular. Both of the tanks with heating line around for heating the oil sludge and increase the separation efficiency.

4) 3 phase separation skid: this is a back up skid, including gravity type oil water separator, once the disc centrifuge failed to work or during maintenance, the 3 phase separation skid will be work as back up.
GN solids control can design and produce customized oil sludge separation system as per client’s different requirement. Pls contact with GN team freely.

As a professional drilling fluids shale shaker manufacturer in China, GN solids control developed offshore ViST vacuum shale shaker and shipped to offshore project this week.

Why use GN ViST vacuum shale shaker?
The user already installed solids control system at site, why they should use GN ViST vacuum shale shaker? GN ViST vacuum shale shaker is GN shale shaker with a vacuum suction hopper installed under the last shaker screen. It has a combination function of solids control shale shaker and high G drying shaker, and save the space to install the high G drying shaker, especially for the offshore drilling rig when there is no enough room to install drilling waste management equipments, The ViST vacuum unit solved the problem.

By using GN ViST vacuum unit, the drilling fluids recycling efficiency will be increased by 30~ 50%, it reduced a lot the discharged drilling cuttings, then reduce the cost to transport, treat and disposal the drilling waste. It reduce the hazardous drilling waste influence to environment, and do not waste electricity power at site, it can use the same air compressor with rig.

Continue reading “Offshore ViST Vacuum Shale Shaker manufacturer in China”

As a professional waste water treatment decanter centrifuge manufacturer in China, GN solids control can produce decanter centrifuge for many different applications, including waste water treatment, mining tailings treatment, dredging slurry separation system, drilling fluids cleaning, drilling waste treatment system, oil sludge separation system, dewatering unit, etc.we shipped several unit of decanter centrifuge to Russia for waste water treatment, the model is GNLW363C-VFD.

The features of GNLW363C-VFD decanter centrifuge:
1) Bowl material is duplex stainless steel 2304 by centrifugal casting, the anti-corrosion is better than SS316L. The screw material is made of SS304 by heat treatment up to 1000 degree, the screw opening allow for better performance and bigger treating capacity. The bowl collection box is made of stainless steel for corrosion resistance.
2) The bearing is SKF brand to ensure the reliable performance

3) The centrifuge will be installed on top of the telescopic skid or on top of mud tank, by working together with dewatering unit.
Except for GNLW363C-VFD, we also have 14 inch bowl decanter centrifuge for high speed up to 3900 rpm GNLW363CG and longer bowl length/ diameter ratio decanter centrifuge GNLW364C-VFD, it can be applied for high viscosity fluids separation. We will send a question list to get exact information of client’s requirement, then provide a customized decanter centrifuge solution for his project. We will have customized design for special fluids solids separation, for example, higher clearance water, drier separated solids.
Continue reading “Waste water treatment decanter centrifuge manufacturer in China”

This week GN solids control shipped 56 units of mud agitator and 3 units of vacuum pumps shipped to China client. Mud agitator is one of the major equipments for mud tank system, it also works together with mud gun.

There are 2 types mud agitators, horizontal and vertical installed mud agitator. Most of the mud agitator is horizontal type mud agitator for oil and gas drilling mud tank system, there are also 2 types horizontal mud agitator, one is direct connection type mud agitator, the gear box and explosion proof motor is installed directly; the other one is coupling connection type mud agitator, the gear box and explosion proof motor is installed through the coupler on the skid. The mud agitator is installed on the mud tank for agitating the drilling mud and prevent it from silting.

The vacuum pump is used to transfer the drilling cuttings, solids waste, oil sludge, dredging slurry, hazardous waste, oil contaminated soils, etc waste. The vacuum pump is operated by air, no need electricity power. There are automatically operation and manually operation for option, the user need to get the vacuum pump ready before commissioning.
We have 10 m3/h, 20 m3/h, 40m3/h flow rate vacuum pump for option, the user can choose different model vacuum pump based on the required flow rate, the max solids size limit will depends on the pump model. Screw conveyor is another method for drilling cuttings transfer system, if the fluids content is very high, the vacuum pump is more suitable for such drilling waste. Continue reading “Mud agitator and vacuum pump to China client”

Recently one set of oil based drilling cuttings treatment system is shipped to CNPC project , the technical specs are as below:
1) High G force vertical cuttings dryer: Vertical cuttings dryer is the ideal equipments to separate oil from oil based drilling cuttings, the result is the oil on the cuttings below 5%. The flushing pump for the vertical cuttings dryer is Germany Netzsch brand screw pump, the client can choose to use their own pump if necessary.

2) High speed decanter centrifuge to separate the fine solids from the fluids recovery from the vertical cuttings dryer fluids discharge port. The centrifuge feeding pump is Germany Netzsch brand screw pump for reliable feeding.

3) Catching tank to collect the fluids discharged from vertical cuttings dryer and decanter centrifuge, the tank divided into 2 compartments, each compartment with one mud agitator to prevent the soils from deposition.

Features of GN high speed decanter centrifuge:
1) Whole screw is made of stainless steel material, heat treatment to 1000 degree for better strength, the screw opening allows larger treating capacity and better separation performance
2) The collection box is made of stainless steel, the bowl is all made of deplex stainless steel 2205 by centrifugal casting.
Continue reading “Oil Based Drilling Cuttings Treatment System for CNPC Project”