Monthly Archives: September 2017

GN solids control showed composite material shaker screens in Indonesia

Last week GN solids control showed our composite material shaker screens in Jakarta, Indonesia for the oil show OGI 2017 successfully.

GN at OGI 2017
The shaker screens we showed at OGI 2017 as below:
1)    Replacement shaker screen for Swaco Mongoose PT, composite material frame
2)    Replacement shaker screens for Brandt King Cobra, composite material frame
3)    Replacement shaker screens for Derrick 500 series shaker, pyramid type
4)    Replacement shaker screens for Derrick 500 series shaker, flat type
A lot of clients showed their interests in our shaker screens, including oil & gas drilling contractors, oil companies.
The clients also interested in GN oil sludge treatment system and Thermal Desorption Unit, and GN drilling cuttings treatment system. GN solids control mainly focus on the manufacture of oil drilling solids control system and drilling waste management system.

GN at OGI oil show
The oil sludge treatment system and TDU is mainly used for the oil waste from the refinery oil tank bottom cleaning , oil waste pit in the rig site, etc. The unique design with compact design and proper treatment process made the oil sludge treatment system very popular during the oil waste treatment contractors.
GN drilling waste management system including the vertical cuttings dryer, decanter centrifuge with feeding pump for oil based drilling cuttings treatment, high G drying shaker , decanter centrifuge with screw pump, mud tank for water based cuttings treatment system. We also showed our international case study for the drilling waste management in Russia, middle east , Africa, South America, Indonesia, etc. countries.
We also showed our case study for mud recycling system of CBM, Geothermal drilling, water well drilling, HDD, boring pile, TBM, etc works.
Solids control equipments are our traditional equipments, including shale shaker, mud cleaner, desander, desilter, vacuum degasser, centrifugal degasser, decanter centrifuge, centrifugal pump, mud tank system, mud agitator, mud gun, etc.

Decanter centrifuge used for construction industry

This week GN solids control shipped the second unit of sand separation system for construction industry to USA client. The first unit of construction sand separation system was shipped to the same client in June, it is already arrived at the client’s jobsite, our engineer is preparing to do the first time installation and commission service in USA to the client’s jobsite.

2017.09.07-Big-Bowl-Centrifuge
Same with the first unit sand separation system, the second set of sand washing system made a little changes.
The technical configuration including the items as below:
1)    GNLW553C-VFD big bowl decanter centrifuge for sand separation, with centrifuge bowl diameter 22inch and length 71 inch, the bowl material is made of duplex stainless steel 2205 or 2304, which is much better than SS 316L. The bearing brand is SKF brand. The decanter centrifuge works together with chemical dosing system to separate the fine solids better and reduce the solids content effectively and the discharged water treated by decanter centrifuge is much more clear and easily for the further waste water treatment after GN sand separation system.

dav

2)    The coarse solids separation shale shaker is used to separate the big solids from the sludge of construction.
3)    The desilter with bottom shale shaker to separate the fine solids with feeding pump to feed to the 4 inch desilter cone. The desilter with 8ea desilter cones with treating capacity 500gpm.

2017.09.07-US-Slurry-Treatment
4)    There is a big hopper to collect the waste sludge from the construction industry, then it is pumped by submersible slurry pump to the coarse solids separation shale shaker.
Continue reading

Oilfield equipments spare parts stock in Houston

GN solids America, as the branch company of GN solids control-the headquarter and facility in Beijing, is the bridge to connect the Chinese good quality solids control equipments and spare parts to the North America and South America market. The warehouse address is 6710 windfern road, Houston, The equipments and spare parts in stock are as below:

gn-solids-america-office-1
1)    Replacement shaker screens for Swaco Mongoose, Brandt King Cobra, Venom, FSI, Derrick FLC500, Derrick FLC 2000, OEM shaker screens for GNZS594E shale shaker and mud cleaner. All the screens in stock are composite material frame shaker screens, GN brand shaker screens have passed APIRP13C lab testing and it is produced as per API RP13C standard.
With features as below, GN shaker screens sold very well in South America and USA.

gn-solids-america-warehouse-2
2)    Hydrocyclones of 10 inch and 4 inch, they are the spare parts for GNZS594 mud cleaner, the 4 inch desilter cone is interchangeable with Derrick mud cleaner and desilter.
3)    Other spare parts for GN equipments, like shale shaker, mud cleaner, decanter centrifuge, etc
4)    Equipments, including
GNZS594E-HB shale shaker with 4 panel screen, the screen size is 585x1165mm
GNZJ594E-2S12N mud cleaner with 2 vibration motor of US Martin brand, each with 2.5HP, the G force up to 7.5G and it is adjustable.
GNLW363CG and GNLW363CG-VFD decanter centrifuge, with 30m3/h treating capacity for drilling fluids, it can be used for drilling waste management, solids control drilling fluids treatment, waste water treatment, solids separation, etc.
Vertical cuttings dryer GNCD930D, which is specially used for oil based waste treatment, working with screw conveyor, screw pump and decanter centrifuge.

gn-solids-america-warehouse-5
And Jet mud mixer, mud gun, mud agitator, etc.
If you have requirement for our equipments and shaker screens urgently, pls contact with GN SOLIDS AMERICA, also welcome to visit our factory in Beijing, China.