GN Solids Control just finish one pieces mud mixing system with regard to Middle East Client, your customer is engaged in HDD drilling project. The client buys the actual system for mixing Bentonite / barite, as mud mixing system for task.

The Bentonite / Barite mixing system including a pair of parts.
Part 1: mud tank system with mud gun & mud agitators, walkways, handrails, ladders, canal, clean gate included.
Portion 2: mixing hopper skid with 2 sets mud hopper, 1 sets centrifugal pump, high steel construction to support the Bentonite large bags.

The clients made the purchase set 500gpm mud system in year of 2013. The performance of the 500gpm mud system is still top notch after 2 years working issue. The 500gpm mud system including:

One set 500gpm shale shaker, working while first phase separation. GNZS703E-HB shale shaker is GN patent shaker with three or more panel shaker screens. Small design and good overall performance can help to improve the drilling performance in a large degree. GN good price spare parts along with short delivery time is additionally good support for clientele.
One set 500gpm mud cleaner with deck shaker & 1 ea desander cone & 8 tool desilter cones, working since second & third spliting up equipment. For HDD drilling project, centrifuge is only important for some special stone tiers.
GNLW452C decanter centrifuge along with 1800rpm bowl speed can certainly remove solids 5 to 10 microns. The treating capacity can certainly reach to 120gpm to help 200gpm depending on the feeding stuff conditions and output situations.
Mud tank equipped with mud agitators, mud guns, mixing hopper, mixing pump, exchange pumps etc .

GN Solids Control is China major manufacturer for solids control equipment & drilling spend management equipment. This is for necessary oil drilling industry.
For HDD drilling project, compact mud cleaning system is required. And that we export many mud clean-up system for overseas buyers and China largest HDD client – CPP.
If you require some mud system and solids control equipment, could you contact us freely.

GN mud system is working for many HDD drilling client, both in domestic market and overseas market. Good performance mud system can help to improve the drilling efficiency, thus to improve the production cost of contracts.  GN Solids Control mud system including 200gpm mud system, 500gpm mud system, 800gpm mud system, 1000gpm mud system etc.

GN Solids Control is China leading manufacturer for HDD drilling mud system, compact design with much smaller footprint. CPP is China largest HDD drilling company, they have over 30 sets mud system from GN and they give us feedback many times each year to help to improve the design of GN mud system. After some years jobsite experience accumulation, GN mud system design is much more user friendly. Even compared with US brand / European brand mud system supplier, GN Solids Control mud system is much more cost-effective.

Recently, we have 2 sets 500gpm mud system delivery to Middle East Drilling client. The basic configuration of the mud system including:

1) One set shale shaker GNZS703E-DZ, this is GN 3 panel shaker specialized for HDD drilling. We also have 4 panel shaker for option. GNZS594E-HB shaker is mostly used for oil drilling, longer shaker deck with 4 panel composite material shaker screen can reach much better performance than 3 panel shakers.

2) One set mud cleaner GNZJ703-1S8N. This is three in one unit mud cleaner with shale shaker & desander unit & desilter unit. It contain 2 phase separation steps, but only one unit, much compact design. The deck shaker is same as shale shaker in above, same spare parts, much convenient for spare parts stock.

3) Three sets centrifugal pump GNSB 6X5-12J. One pump is feeding for desander cones; the other one pump feeding for desilter cones; the last one pump for transferring the mud out to rig.

4) Mud hopper installed upside of the mud tank, for mixing chemicals, like bentonite / barite. Some client want the mud hopper installed downside the mud tank, easy for mixing. In this case, we may offer one set jet mud mixer with one mud hopper & one pump installed on same skid plate. This part can be customized as per clients’ requirements.

Any request, pls contact GN Solids Control.

GN 500GPM mud recycling system is the most popular size for different kind of trenchless activities, like horizontal directional drilling (HDD), coal bed methane (CBM), water well drilling, and small size workover rigs.

GN Solids Control makes GN 500GPM mud recycling system. The system is equipped with 1 ea shale shaker, 1 eadesilter mud cleaner. But do you know how to operate the system?

Below is the Operation Instruction for Electric Control system of GN 500GPM mud recycling system.

1. Connect the main power source; turn on power source switch of system electric control cabinet, working voltage shown on voltmeter.

2. Press 1# Sand Pump start button when start it. 1# Sand Pump is startedwhile indicator light for 1# Sand Pump Operation is on and 1# Sand Pump start to run.  Press 1# Sand Pump stop button when stop it. 1# Sand Pump is stopped while indicator light is off and pump stops.

3. Press 2# Sand Pump start button when start it. 2# Sand Pump is started while indicator light for 2# Sand Pump Operation is on and 2# Sand Pump start to run.  Press 2# Sand Pump stop button when stop it. 2# Sand Pump is stopped while indicator light is off and pump stops.

4. Press Mud Agitator start button when start it. Mud Agitator is started while indicate light for Mud Agitator Operation is on and Mud Agitator start to run.  Press Mud Agitator stop button when stop it. Mud Agitator is stopped while indicate light is off and Mud Agitator stops.

5. Press Submersible Pump start button when start it. Submersible Pump is started while indicate light for Submersible Pump Operation is on and Submersible Pump start to run.  Press Submersible Pump stop button when stop it. Submersible Pump is stopped while indicate light is off and Submersible Pump stops.

6. Press Shale Shaker start button when start it. Shale Shaker is started while indicate light for Shale Shaker Operation is on and Shale Shaker start to run.  Press Shale Shaker stop button when stop it. Shale Shaker is stopped while indicate light is off and Shaker stops.

7. Press Mud Cleaner start button when start it. Mud Cleaner is started while indicate light for Mud Cleaner Operation is on and Mud Cleaner start to run. Press Mud Cleaner stop button when stop it. Mud Cleaner is stopped while indicate light is off and Mud Cleaner stops

Recently, we have two sets of 1500gpm mud system for one big HDD project. The client is China local famous contractor on HDD project and Tunnelling project. The 1500gpm drilling mud system including below items:

1)       3 sets of shale shaker, each shaker 500gpm treating capacity and 1500gpm for 3 shakers. GNZS594E-HB shale shaker is the most popular shaker for oil drilling mud treatment application, the long deck with 4 panel shaker screen can reach very good working performance. For HDD project, 4 panel shaker is also very popular. The price of 4 panel shaker and 3 panel shaker is almost same, but the working performance is much better.

2)       1 sets mud cleaner with 3 ea desander cones & 16 ea desilter cones. The mud cleaner is combination of desander, desilter and deck shaker. Much compact design with smaller footprint, the treating capacity can reach to 1500gpm treating capacity.

3)       2 sets centrifugal pump for feeding desander cones & desilter cones. The centrifugal pump is replacement for NOV brandt mission pump.

4)       One recycling tank with above solids control equipment; one mud storage and mixing tank with mud agitators, mud guns, mud hoppers, shear pump, centrifugal pumps….Totally 2 mud tanks for one set 1500gpm mud system

Except for this 1500gpm mud system, we have over 30 sets 500gpm mud system working for CPP, China largest HDD contractor. We also export some 500gpm mud system to overseas client for water well drilling.

GN Solids Control have two major products areas. One is for HDD compact mud systems, the other one is oil drilling mud systems / solids control equipment / decanter centrifuges.  GN Solids Control have hold hands with many overseas drilling contractors, mud engineering chemicals companies, mud service companies, oil service companies, shaker screen trading companies etc. If you are in need of some solids control equipment, pls contact us freely. We will provide with professional consultant service, high quality equipment and reliable after sales service.