Monthly Archives: March 2019

Tandem shale shaker shipped to Middle East

This week we shipped several units of tandem shale shaker to Middle East for oil service company. The shale shaker is linear motion single deck 4 panel shale shaker, the 2 units of shale shaker installed on one tandem skid for convenient transportation and installed on the solids control system.


The complete unit of the tandem shale shaker is up to 1200gpm for WBM, OBM, SOBM, the actual treating capacity will depend on the density& viscosity of the drilling fluids and API mesh size used. GN solids control produce composite material shaker screens from API 20 to API 325, GN brand shaker screens are all compliant with API RP13C standard.
The shale shaker features are as below:
1) 4 panel shaker screens with composite material frame for longer working life, dimension as 585x1165mm
2) The shaker deck material is stainless steel 304 for better corrosion resistance
3) Patent rubber sealing on the shaker deck for better sealing
4) The 2 vibration motor is Italy Oli brand or Itavibras or US Martin brand, the explosion proof could be CNEX, ATEX OR IEC EX for option
5) The possem belly for the tandem shale shaker as drilling fluids flow distribution are included in the package. Container loading size for convenient transportation.
6) Adjustable G force up to 8.0 G, the shaker deck angle adjustment from -1 to +5, the both sides of the shaker deck will be adjusted simultaneously.
Except for shale shaker, we also produce mud cleaner, decanter centrifuge, vacuum degasser, mud agitator, centrifugal pump, mixing hopper, mud gun, mud gas separator, vertical cuttings dryer, mud tank, drilling waste management system, oil sludge separation system, pls contact with GN solids control for more information. Welcome to visit our stand at CIPPE 2019 and OTC 2019, we will show our high quality products at the oil exhibition.

hdrpl
hdrpl

GN shipped one batch of hydraulic drive decanter centrifuge, screw pump & centrifugal pump to Middle East

Recently GN shipped one batch of hydraulic drive decanter centrifuges with feeding pumps and 80 units of centrifugal pumps to Middle East, The feeding pump is Netzsch brand screw pump, this is the popular and ideal equipments to feed decanter centrifuge.
We have electric drived decanter centrifuge and full hydraulic drive decanter centrifuge for different client’s requirement, especially for heavy drilling fluids, hydraulic drive centrifuge will be a good option. Compared with electric drive decanter centrifuge ( high speed decanter centrifuge, middle speed decanter centrifuge, VFD decanter centrifuge, centrifuge bowl diameter from 9 inch to 30 inch), the hydraulic centrifuge bowl assy is same, just the drive system and structure design is different. Hydraulic drive decanter centrifuge could be used in the area with high ambient temperature for heavy mud with flexible bowl and differential speed various application like barite recycling, mud dewatering and waste cuttings management.
The Features of hydraulic drive decanter centrifuge is as below:

  1. Europe brand hydraulic drive system with PLC smart control and safe operation
  2. Compart structure with everything on one skid for easy movement
  3. It is necessary to use hydraulic drive centrifuge for high viscosity, heave mud in high temperature area, and it is easier to adjust the differential speed to get better performance of the centrifuge treatment.
    GN centrifugal pump is composed of pump head, coupler, skid by centrifugal casting, control panel. The features of GN solids control brand centrifugal pump:
  4. Pump impeller and pump casing material is made of hard ductile iron alloy for longer working life and better wear resistance
  5. All the parts and complete pump size is interchangeable with world famous brand centrifugal pump
  6. Mechanical seal to provide zero leakage and longer operation life
    If you need more information about Hydraulic drive decanter centrifuge, pls contact with GN solids control.
cof
hdrpl

Containerized drilling waste treatment system to Russia

This week GN solids control shipped containerized drilling waste treatment system to Russia again, this is not the first time we designed customized drilling waste management system for Russia drilling company, we set our standard drilling waste management equipments inside the standard 40ft container to keep them warm during operation in Winter, this is special for Russia area where the temperature in Winter is extremely low.

hdrpl

The decanter centrifuge and vertical cuttings dryer is installed on the frame which is fixed with the 40ft container, the container with windows, doors and the top cover is openable for convenient maintenance and screen basket replacement of the vertical cuttings dryer. And inside the container walls are protected by special material to keep it warm in Winter.
Features of GN vertical cuttings dryer:

hdrpl

1) The rotor is one of the major components for the vertical cuttings dryer, the rotor assembly is balanced, and the flights on the rotor is also individual balanced, then their complete set is also balanced for future replacement of the rotor assy.
The flights material is hard facing to HRC65 for longer working life.
2) The screen basket is also the major components, and it is also individual balanced for the screen and the frame, the user can only replace the screen basket without remove the frame when it is damaged or blocking.
3) The high pressure air knife is to clean the screen basket to avoid the blocking of the screens, the opening of the screen is optional as 0.25mm, 0.35mm and 0.5mm. Continue reading

Welcome to visit GN solids control at CIPPE 2019

One of the largest oil show in Asia-CIPPE 2019 will be held in March, welcome to visit GN solids control stand at CIPPE 2019 in Beijing.
The general information is as below:


Show Time: March 27-29, 2019
Show Location: New China International Exhibition Center, Beijing (No.88, Yuxiang Road, Tianzhu, Shunyi District, Beijing)
GN Booth: E2168 (Hall E2)
Same as usual, GN solids control will show our lastest technology and equipments to participate in the show, and meet our valuable clients there. After the show, welcome to visit our factory which is very close to the exhibition center, only 30km by drive. All the clients from international and domestic are welcomed to check our facility, workshop, management and equipments.


GN showed one set of compact designed oil sludge treatment system at CIPPE 2018, many clients showed their interests on the oil sludge treatment system, after the show, the system has been tested by the clients in domestic, the separation result is very satisfied by the client, for more information, pls check the working video and case study from our formal website:http://www.gnsolidscontrol.com/video/oil-sludge-treatment-test-unit-working-video


After the show, the 1 m3/h oil sludge treatment have been sold to many clients in domestic and also for international clients. We also make several units of 5m3/h, 15 m3/h oil sludge treatment system with customized design for Europe and USA clients.
If you are interested in GN oil sludge treatment system, pls contact with GN sales engineer to get a question list. Continue reading