Monthly Archives: December 2017

Vacuum Degasser and shale shaker for Uzbekistan Drilling Company

Recently GN solids control shipped shale shaker and vacuum degasser to Uzbekistan drilling company, this is not the first order from the drilling companies in Russia Area, we had sold hundreds of linear motion shale shaker, linear motion mud cleaner, vacuum degasser, centrifugal degasser, decanter centrifuge, shaker screens, etc. solids control equipments to Russia clients, also we sold containerized drilling waste management system to Russia area for low temperature drilling activities below -40℃.

bty

We have 3 models linear motion shale shaker which can be used for oil & gas drilling solids control system. GNZS703E-HB with treating capacity 528gpm, 3 panel shale shaker with screen area 2.63m2, we use composite material frame shaker screens for longer service life GNZS594E-HB with treating capacity 616gpm, 4 panel shale shaker with screen area 2.73m2, we use composite material frame shaker screens for better treating performance. The screen dimension is replaceable with Swaco Mongoose PT shale shaker. The composite material frame shaker screen with 20% bigger effective screen area, and the working life will be much more longer compared with traditional steel frame shaker screen.
GNZS593E-HB shale shaker is a new design from GNZS594E-HB shale shaker, for some old solids control system which ever installed other brand shale shaker, there is no enough place to install the 4 panel shale shaker, so we design the 3 panel shale shaker instead of the 4 panel shale shaker, and with the same shaker screen dimension, the clients can use our OEM shaker screens for both GN shale shaker and Swaco Mongoose shale shaker.

cof

We have horizontal vacuum degasser and centrifugal degasser for option, horizontal vacuum degasser is a traditional vacuum degasser, centrifugal degasser is installed vertically to save place on the mud tank system, and the maintenance cost is cheaper.
If you required solids control equipments, pls contact with GN solids control.

To get gift from GN solids control, Merry Christmas and Happy New Year!

2017 is almost finished, we sincerely wish all the clients and their families merry Christmas and Happy New Year, and we are glad to announce that you can get gifts from GN solids control by following the steps below:
1)    Download the customer feedback form:
http://www.gnsolidscontrol.com/downloads/Customer-Feedback.docx

Merry Christmas Wallpapers

Merry Christmas Wallpapers

2)    Fill in the customer feedback form with signature and your company stamp, and send us scan copy.
3)    Our sales team will arrange to express the gift to your address and support you for customs clearance.
In the past year 2017, we got a lot of repeat orders from our old clients for solids control equipments and drilling waste management equipments, also we got new orders for oil sludge separation system from our new clients. We got a lot of new equipments available to use for our operations. Including:
Sludge vacuum pump: it can be used to transfer drilling cuttings or oil sludge, it can be replaced one unit of screw conveyor, it still need another set screw pump to be installed slantly to feed to the vertical cuttings dryer or you can buy a unique designed collection hopper to connect with the vertical cuttings dryer.
Oil sludge separation system to be installed in the refinery, to get pure oil, water and dischargable solids.
Composite material shaker screens for GN OEM shale shaker, replacement shaker screens for Derrick, Swaco Mongoose, Brandt Cobra, FSI, etc.
Centrifugal degasser instead of vacuum degasser, which is used to separate harmful gas from the cut in mud.
Your feedback is very important for GN solids control, we will keep improving our products quality, service and design, so we will look forward your customers feedback form signed. Hope in the future we could provide better service and solution for your projects, we aspect long term cooperation relationship with all the clients.

Trailer mounted dredging slurry separation system

Dredging slurry separation system/ Industry waste water treatment is one of the applications of GN solids control, except for solids control system, drilling waste management system, oil sludge treatment system, horizontal directional drilling system, core bed methane drilling, geothermal well drilling, water well drilling.

hi-G dryer
The basic working principal is that the dredger will take the contaminated sediment toxic and non-toxic element, and sludge from the big environmental dredging of pond revitalization, the sludge will be pumped by the submersible slurry pump to the dredging slurry separation system, which will separate the solids from the water as much as possible. The dredging slurry separation process including:
First step cleaning: shale shaker, to separate the solids bigger than 100 microns from the water, we will metal slit screen or complete composite screens to separate the big solids, like bricks, garbage, branch, rocks, etc. For a 1000gpm sludge separation system, we will use 2 units of GN 4 panel shale shaker. But the shale shaker may not be necessary when there is no big solids and all of the particles are smaller than 100 microns, it will be useless.
Second step: desander cone with bottom shale shaker to separate the solids between 45 microns to 100 microns, 2 ea of 10 inch desander cone is sufficient for 1000gpm treating capacity.

22-2
Third step: 4” desilter cone with bottom shale shaker to separate the solids bigger than 20 microns, 12 ea of 4 inch desilter cone is enough for 1000gpm treating capacity.
The fourth step: 2” desilter cone with bottom shale shaker to separate the solids bigger than 10 microns.
Continue reading

Drilling cuttings transfer system in Argentina

GN solids control produce drilling cuttings transfer system based in China, Beijing, there are 2 options for drilling waste transfer, one is the vacuum pump, the other one is the screw conveyor system. The vacuum pump with advantages of cheaper price, no need electric power consumption, and compact design, which is the ideal equipments to transfer the drilling cuttings, oil sludge, oil contaminated solids, etc. But for high viscosity oil sludge, it will be difficult to use vacuum pump to transfer from the waste pit to the premixing system, but for drilling cuttings, the vacuum pump works very well, pls refer to GN website to watch the working video of the vacuum pump.

2017.12.04-vacuum-pump-testing-1
The screw conveyor system can transfer the cuttings with less moisture only, if with too much water/ oil mixture fluids, the fluids will flow back to the waste pit or spill out of the conveyor, because mostly the screw conveyor is installed slantly. And the same time, the screw conveyor need a large area to install, sometimes the area in the rig site is very limited to install the screw conveyor system, also considering the power consumption and cost.
The operation of the vacuum pump need an air compressor, which can be also used to run the decanter centrifuge VFD control panel. All the VFD control panel is positive pressurized variable frequency drive, with the cooling tube installed on the side.

2017.12.04-vacuum-pump-testing-2
The vacuum pump can suck the solids/ cuttings/ oil sludge from the waste pit up to 50m, distance up to 100m, the max solids is up to 75mm( 3 inch). The max transfer capacity of this model is 40m3/h, the 10m3/h model and 18m3/h model is also under production.
Welcome to visit GN facility in Beijing, China and see the working video of the vacuum pump.

GN finished the complete improvement of Machines in Painting Workshop

As a responsible company, GN solids control produce environemental protection equipments for drilling fluids recovery, drilling waste management,oil sludge treatment, waste water treatment, etc. We are authorized as National High-Tech Enterprise since 2016, we improved our previous painting workshop machines recently and fully comply with the latest national environmental requirements, which will help us to improve the our equipments painting and coating quality, and improve our delivery time. The major machines including:

2017.12.01 Ball Blasting
Automatic ball blasting machine:
Constant temperature dustless airless spray:
Electrostatic powder line:

2017.12.01 Workshop
GN solids control is the only solids control manufacturer who owns our own ball blasting machines, we can control the quality better. The most important process for shale shaker / mud cleaner deck anti-corrosion is bottom material treatment and painting. After GN ball blasting, degree SA2.5, life time for anticrossion is 10~15 years.
Difference between sand blasting and ball blasting is as below:

2017.12.01 Powder Coating
Sand blasting function: derusting, remove the oxide coating on the surface
Ball blasting function:
1. derusting, remove the oxide coating on the surface
2.Improve the roughness on the surface
3. remove the burr of the parts
4 Eliminate stress of the part
5 reduce the Deformation of the parts after heat treatment
6 Improve the Wear resistance and Compression capability on the surface
Generally speaking, ball blasting is with better quality than sand blasting, and difficult to achieve. So GN shale shaker with longer time for anti- corrosion compared with other brand shale shaker. The composite material frame shaker screen has longer working life compared with traditional steel frame shaker screen, and the effective screen area is 20% bigger than steel frame shaker screens. The drilling fluids touch parts shaker deck are made of stainless steel 304, which is anti-corrosion.
Welcome to visit our facility in Beijing, China and check our new painting workshop.