Monthly Archives: October 2023

ATEX certified Vacuum Degasser and Mud Gas Separator to Europe Client

One unit of ATEX certified vacuum degasser and mud gas separator are ready for shipment to Europe client.
Mud gas separator, also called poor boy degasser, GN ZYQ series atmospheric pressure mud gas separator is a specialized equipment for primary degassing of gas cut drilling fluids, mainly used to remove gas cut drilling fluids with a diameter of approximately ≥ φ 3mm large bubbles. These large bubbles refer to the expansive gas that mostly fills a certain section of the wellbore annulus in the drilling fluids. If it is not removed, it will easily cause a kick or even spray out of the surface of the drilling disc.
GN ZYQ series atmospheric pressure anti hydrogen sulfide mud gas separator is made of high-quality materials, which can effectively prevent the erosion of harmful gases and ensure the safety of human machine production.

Features of GN mud gas separator:

  1. The poor boy degasser adopts bottom drainage to control the height of the working liquid level, ensuring a constant liquid level in the separator and solving the problem of sand accumulation in the tank;
  2. The poor boy degasser tank is equipped with a dedicated gas separation channel, which allows for smooth gas evacuation and improves gas treatment efficiency;
  3. The mud gas separator adopts physical impact separation to ensure the gas separation effect;
    GN ZCQ series vacuum degasser is mainly used for separating gas from drilling mud, which is specialized equipment developed based on various types of vacuum degassers a for treating gas immersed drilling fluids. Suitable for various mud recycling systems, it is very important for restoring the specific gravity of mud, stabilizing the viscosity of mud, and reducing drilling costs.
    We will install ATEX certified electric motor and control panel for the vacuum degasser, and also for the vacuum pump motor. No extra jetting pump is required for the vacuum degasser’s operation.

GN Solids Control participate in ADIPEC 2023 successfully

Recently GN solids control participate in ADIPEC 2023 oil show successfully. The exhibition information is as below:
Time: October 2nd to 5th
Location: Abu Dhabi, UAE
GN Booth No.:13440
What equipments we have shown at ADIPEC 2023?

1) vacuum pump, as a 100% air operated transfer pump, it has been widely used to transfer oil waste, oil sludge, industrial waste water, and other sludge with high solids content and high viscosity, the vacuum pump can be mobile or fixed type according to different models, the mini model GNSP-10B vacuum pump can be also used as vacuum cleaner for clean up jobs. It can be used to clean fluids from drill floors, decks, pipe racks, mud rooms, drains, tanks and other mud spill. The automatically operation make it capable to operate as a transfer pump for various materials.

2) centrifuge rotating assembly, which is the major components of a decanter centrifuge, we can produce decanter centrifuge from 9 inch diameter bowl to 30 inch diameter bowl, high speed , VFD and FHD driven system is available. During production, the centrifuge rotating assembly will be through 3 times balancing, the first balancing is bowl balancing, the second balancing is screw balancing, the third balancing is complete rotating assembly part balancing.
This year even though our stand is not big, but we also take our major equipments/components to the show and welcome customers from all of the world to check it. We have deep communication with our clients regarding drilling mud solids control equipments such as shale shaker, mud cleaner, vacuum degasser, decanter centrifuge, centrifugal pump; drilling cuttings treatment equipments such as decanter centrifuge, vertical cuttings dryer, screw conveyor ; oil sludge treatment unit, shaker screens, vacuum pump and other mud tank system project. If you have any requirement, pls contact us freely.

GN attend the 2023 Indonesia Exhibition for Mining and Oil Industry successfully

This week GN solids control and GN separation joint attend the 2023 Indonesia exhibition for Mining and oil industry successfully. This is the first time for GN separation to attend the Mining Indonesia 2023 exhibition, we introduce our new mining shale shaker by this opportunity, including stackvibrating screen, high frequency vibrating screen, dewatering vibrating screen, classification vibrating screen, large linear vibrating screen, large Banana vibrating screen, large flip flow vibrating screen, also we provide polyurethane screen panel for different type mining vibrating screen.

Also as one of the experienced oil and gas solids control shale shaker manufacturer in China, high efficiency drilling fluids shale shaker and mud cleaner is our major equipments, we also introduce shale shaker, shaker screens for most of the famous brand shale shaker, various size of decanter centrifuges for different projects, desander, desilter, mud cleaner, centrifugal pump, mud agitator, mud gun, vacuum degasser, mud gas separator, mud tank, solids vacuum pump, vertical cuttings dryer, high G drying shaker, screw conveyor, etc. solids control and drilling waste management equipments. The application of vibrating shaker is widely such as oil & gas drilling, geothermal drilling , coal bed methane drilling, HDD trenchless engineering, mining separation, etc.

GN solids control focus on the solution of solids liquid separation for our customers, if only the specific gravity of the 2 different materials have a difference, we can provide a customized solution for separation. For example, oil sludge separation for oil, water and solids 3 phase separation; drilling fluids cleaning for cuttings and useful drilling fluids separation; mining tailing treatment for solids and water separation; drilling waste disposal for discharged cuttings, water and oil separation, etc.
If you need an solution of oil sludge treatment, drilling waste disposal, solids control drilling fluids cleaning , pls contact with GN solids sales engineer.