This week GN solids control shipped 2 units of sludge vacuum pump to UAE client. The transfer rate of these 2 units of vacuum pump are 40m3/h, we also have 20m3/h and 10m3/h vacuum pump which can be made as mobile type. We showed these vacuum pumps at CIPPE 2018, OTC 2018 and other important international oil exhibitions, and got a lot of inquires from our clients. The applications of sludge vacuum pumps including:

cof

1) Waste mud and waste solids discharged from shale shaker, mud cleaner and centrifuge transfer
2) Drilling mud transfer
3) Waste pit cleaning
4) Hazardous waste recovery
5) Oil sludge, tank bottoms residual removal and transfer
6) Barge holdings and vessel bottom clean out
7) Bulk tank and silo transfer of material
8) Sand; Course, fine, conventional and frac sand
9) Diatomaceous earth

cof

10) Animal waste etc.

We will choose the proper model vacuum pump for our clients as per their site situation, sometimes the client need to take the oil sludge from the 20m high oil tank in the refinery, but the man hole is too small to put a vacuum pump in, we will do a disassembly for the client, and assembly them inside the tank, we will disassembly parts as less as possible so that the client can install them easily.
Continue reading →

GN oil sludge treatment unit perform well in the field, the client is very satisfied with the working performance and result. Pls check the working video from the link below:
http://www.gnsolidscontrol.com/video/oil-sludge-treatment-test-unit-working-video
The oil sludge treatment unit treating capacity is 0.5 ~1 cm3/h, we ever showed it at CIPPE 2018, it got much interests from our clients, and we met with good chemical suppliers in the exhibition who is willing to cooperate with GN to provide a complete solution for our clients.
To get more information regarding the unit, pls contact with GN solids sales engineer to get the brochure.

cof

The oil sludge separation unit features:
1.    Compact design
2  unique technical process, including heating, chemical jetting, mixing, coarse solids separation shale shaker, 2 phase decanter centrifuge, disc centrifuge, buffer tank, collection tank, transfer pump, screw pump, electrical control panel, dewatering unit ( chemical dosing system with dosing pump), etc.

cof

3 cheaper price compared with the bigger treating capacity oil sludge separation system, we can make customized design for our clients with 10m3/h system, 20m3/h oil sludge separation system, etc.

After treatment, the oil will be collected by oil tank, it can be sold to the refinery, the water is collected by water tank, then it will go to waste water treatment facility if you need to get drink water or disposal it to the river, also you can collect the water and reused in the system for circulation. The solids is collected by the collection box for landfill or road or construction. If you use proper chemical and treatment process, normally the oil result is BSW <3%, the water result is ppm <50, the oil in the solids is below 2%, it can be accepted by most countries for disposal.

Continue reading →

GN solids control will participate in Global Petroleum Show 2018 (GPS) in Calgary, Canada, this is not the first time for GN to participate In this oil show, this is the 3rd time of our participation. We got valuable clients during the oil show period.
The exhibition general information is as below:
Show Time: June 12-14, 2018
Show Address: Stampede Park, Calgary, Canada
GN Booth: Hall ABC 1731-4
GN will show our new technology and the most popular products in the oil exhibiton GPS.
1)    Slurry vacuum pump , this is the new products since last year, it is used widely to transfer all kinds of waste, like oil sludge, waste oil, drilling cuttings, dredging slurry, hazardous waste, oil contaminated solids, etc.
2)    Composite material frame shaker screens , GN produce composite material shaker screens for world famous brand shale shaker, like SWACO MONGOOSE, Brandt King Cobra and Venom, VSM 300 primary layer, second layer, FSI all series shale shaker, Kemtron all series shale shaker, Derrick shale shaker screens, etc.

3)    Centrifugal pump, GN C version centrifugal pump is 100% interchangeable with world famous brand centrifugal pump, we also provide replacement parts for other brand centrifugal pump, welcome to send us part number to get the price list.

Continue reading →

GN solids control is now participating the OTC 2018 ( Offshore Technology Conference) in Houston, TX. As usual, we have 2 stands there, the stand number is as below:

Center Hall with number 1369 For GN solids control
8000 in Arena Hall for GN Solids America.
We got huge success at OTC 2018, and we showed the new technology and equipments:

1 Sludge Vacuum pump, it can be widely used to transfer oil sludge, waste oil, drilling cuttings waste, dredging slurry, contaminated solids and all kinds of waste. It operates with air compressor, do not need electric motor drived. GN solids control owns 3 models for option, GNSP-40A with 40m3/h treating capacity, GNSP-10A with 10m3/h flow rate, GNSP-20A with 20m3/h rate. The operation method could be automatically or manually for option. We have customized solution to help our clients to take out the oil sludge from the deep oil tank in refinery.

2 Centrifugal pump and spare parts, which is interchangeable with world famous brand centrifugal pump and the spare parts are all interchangeable. All of the pumps are mechanical seal centrifugal pump, the pump cover and impeller material are both anti- corrosion material.

3 composite material frame shaker screens, as the replacement shaker screens for all the major brand shale shakers in the world, the effective screen area is 10% ~ 20% larger than the traditional steel frame shaker screens, the working life is much longer than previous design. We sold thousands of such screens in USA every month.

Continue reading →