Recently GN solids control shipped one batch of solids control equipments to Uzbekistan for low temperature cold weather. The solids control equipments including shale shaker, mud cleaner, decanter centrifuge, vacuum degasser, etc, the environmental temperature is below -50℃.We have much experience to provide low temperature solids control equipments for cold weather, we had sold many sets of drilling waste management systems equipped inside the 40ft container to keep the equipments and drilling waste warm and prevent them from frozen and stop working.

cof

As the most professional solids control equipments manufacturer in China, we provide the complete line solids control equipments for oil & gas drilling rig, the main equipments as shale shaker, mud cleaner( also as combo unit), decanter centrifuge, vacuum degasser, centrifugal degasser, mud gas separator, mud agitator, mud gun, mud hopper, centrifugal pump, shaker screens, etc. According to client’s different requirement, we will provide different explosion proof standard vibration motor, electric motor and control panel to suit for different weather, different kinds of drilling fluids.

cof

We have linear motion shale shaker and balanced elliptical motion shale shaker for option, also we have dual motion shale shaker to meet client’s requirement. Normally linear motion shale shaker is enough for drilling, we use Italy Oil brand vibration motor or US Martin brand vibration motor or Italy Itavibras brand vibration motor for different projects. The composite material shaker screens are installed on the shale shaker freely, the shaker screen size is interchangeable with world famous brand shale shaker, GN solids control produced composite material shaker screen is with longer working life, better separation performance, longer storage life, larger effective screen area, better quality then traditional steel frame shaker screens.

cof

Continue reading →

Recently one set of 1500HP Drilling Rig Solids Control System Package is almost finished production for India client, this is the repeat order from the same client for customized design.
The features of the shaker tank package:

cof

1) 3 phase cleaning of drilling fluids, shale shaker is the first phase cleaning and the most important cleaning of the drilling fluids, the better separation performance of the shale shaker, the better cleaning of the whole solids control system, if the shale shaker did not work well, the coarse solids will drop into the sand trap and it can not control the solids content effectively, it will influence the cleaning performance of the next step cleaning desander cone and desilter cone, the higher solids content will damage the desander cone and desilter cone very easily and quickly. Also the centrifugal pump will be also easily damaged for the same reason. Desander cone is the second phase cleaning, desilter cone is the third phase cleaning, the cut point is 20 microns. The decanter centrifuge system is an additional requirement as the 4th phase cleaning.

cof

We installed the durable composite material shaker screens for the better separation performance, the effective screen area is 20% larger than steel frame shaker screens, the storage period is up to 5 years, the working life is much more longer than traditional steel frame shaker screens.
2) Compact design, convenient transportation for the whole package

cof

Continue reading →

GN solids control will show shaker screens at Future Energy Asia 2018, shaker screen is our major products among the solids control equipments and drilling waste management equipments line.

We can produce durable composite material frame shaker screens for our own brand shale shaker , also for the world famous brand shale shaker. Like replacement shaker screens for Derrick FLC 500 series, FLC 58-30, 600, hyperpool, Swaco Mongoose, MD-2/3, Brandt Cobra / Venom, VSM300, FSI, etc.
Compared with steel frame shaker screens, the composite material frame shaker screens can use longer time, the storage can be up to 5 years, and the effective screens area is 20% longer, the 3 layers wire mesh is more stable compared with 2 layers wire mesh, which also longer the working life.

Except for shaker screens, we also produce linear motion shale shaker, linear motion mud cleaner, high speed decanter centrifuge, VFD decanter centrifuge, middle speed decanter centrifuge, vacuum degasser, centrifugal degasser, mud gas separator, high G drying shaker, centrifugal pump, submersible slurry pump, vacuum pump, vertical G dryer, screw conveyor, disc centrifuge, oil gas separator, mud tank system, mud agitator, mud gun, mixing hopper, flare ignitor, etc. equipments, we provide customized solids control system and drilling waste management system and oil sludge separation system for oil field, also the liquid solids separation system for industry waste water, also the mud cleaning and mixing system for HDD & CBM. Continue reading →

This week we shipped 2 units of mud recycling & mixing system to India HDD contractor. This is the repeat order from the same client, why it is necessary to use the mud recycling & mixing system?
1) Reuse the drilling fluids to prepare for new drilling fluids, save the drilling cost for the HDD contractor

cof

2) Reduce the drilling waste and reduce the influence to the environment, reduce the cost to treat the drilling waste
3) Multi function mud system with recycling, mixing, enough storage
4) A good mud recycling system can lubricate the HDD machine and protect the HDD machine, the working life of the HDD machine can be longer
The technical configuration is as below:

cof

1) 10ea desilter cone installed on top of the double deck shale shaker as 2 phase cleaning equipments, the bottom deck worked as coarse solids shale shaker which is the 1st phase cleaning, the top deck worked as mud cleaner to treat the fluids dropped from the desilter cone to recover more useful drilling fluids and the discharged waste could be drier.
2) The centrifugal pump is 100% interchangeable with Mission Magnum centrifugal pump, the impeller and pump casing material is hard ductile iron alloy for abrasion resistance.
Continue reading →

As the branch company of GN solids control in Houston, USA, GN solids America have many shaker screens in stock for immediate shipment, this week we ship another 3 container shaker screens to USA for the clients in North America and South America. Except for shaker screens, we also have linear motion shale shaker, linear motion mud cleaner, VFD decanter centrifuge, vertical cuttings dryer, centrifugal pump, spare parts in stock there for solids control, drilling waste managements, waste sludge treatment and other customized design solids liquid separation system. Welcome to contact with GN solids sale engineer for more information.

We are OEM manufacturer of shaker screens for our own shale shaker, also we can produce replacement shaker screens for other famous brand shale shaker, all of the screens are durable composite material shaker screens for longer working life and better separation performance. Our screens has passed the API RP13C test port by API authorized lab in USA. The correct API configuration can help the mud engineer to make a correct design of screen API NO. to control the drilling fluids.

Compared with the traditional steel frame shaker screens, the composite material shaker screen will last longer time and with larger effective screen area, the storage of the composite screens is up to 5 years without getting rusty. The 3 layers wire mesh also ensure the longer working life. Every month we shipped thousands of shaker screens to over 70 countries in the world for both oil industry, mining industry and HDD & CBM industry. Especially in America market, our screens have been proved by many sites, the client repeat order frequently.

Continue reading →