GN ITEM CENTRIFUGE is designed to provide greater efficiency at low operating charges for every oilfield and industrial programs. This extremely powerful decanting centrifuge rebounds 95 % of barite and returns it towards the active method, when rejecting finer, low-gravity solids. The delicate design within the stainless bowl and scroll keeps a level layer of communicated solids for a lot more uniform separation and maximum solids-control efficiency.
GN ITEM desander has 14. in. diameter and 34. long (353-mm x 860-mm) getting a stainless-steel bowl and conveyor set up. The variable speed major drive is v-belt-driven via a torque ripper tools with a 25-hewlett packard, explosion-proof, motor unit. The important thing drive (1,600-3,300 revoltions per minute) bowl speeds are very easily transformed with the variable-step sheave arrangement. The differential or back drive is v-belt-driven with a 7.5-hewlett packard, explosion-proof, and motor unit. The differential speed within the conveyor might be modified from -18 to no more than 85 revoltions per minute.
The 414 CENTRIFUGE includes a contour bowl set up which involves hardfacing protection inside the feed zone, tungsten carbide discharge ports and hardfaced conveyor plane tickets. A 2-step planetary three.5-knm gearbox utilizing a 57.1:1 ratio drives the centrifuge. Additional overload protection is provided utilizing a mechanical clutch and safety shutdown products.
Balanced scroll style increases recovery capacity
High centrifugal pressure creates centrifugal pressure of 500 G??￥s at its operating speed of just one,600 Revoltions per minute although processing around 140 GPM (530 L/min)
Effective operation processes around 140 GPM (530 L/min) having a 6- to 10-micron reduce on weighted dirt systems processes around 250 GPM (946.four L/min) getting a 5- to 7-micron cut point on unweighted dirt
Stainless bowl, scroll compartment and canopy to face up to corrosion and abrasion
Tungsten-carbide scroll points with wide spacing plane tickets in the narrow finish produce a finer layer of communicated solids for additional uniform separation under high G-forces
Precision balanced to operate at greater RMs for longer periods with greater efficiency, reducing upkeep and down time
Operating safety controls include self-restricting vibration and torque switches to protect against catastrophic failure
Variable speed electro-hydraulic backdrive is instantly like an solution
Advantages
Rebounds 90 % of barite, reducing pricey additions although keeping recommended dirt weights
Rejects finer, low-gravity solids from drilling liquids
Cost-efficient operation reduces discard volume versus dilution displacement
options 30 to sixty percent based on dirt weights Well suited for use with weighted or unweighted dirt systems
Rugged building and corrosion-resistant materials deliver extended service existence and occasional upkeep costs within the most difficult oilfield conditions. Click this link to know more information.