2017 is almost finished, we sincerely wish all the clients and their families merry Christmas and Happy New Year, and we are glad to announce that you can get gifts from GN solids control by following the steps below:
1)    Download the customer feedback form:
http://www.gnsolidscontrol.com/downloads/Customer-Feedback.docx

Merry Christmas Wallpapers

2)    Fill in the customer feedback form with signature and your company stamp, and send us scan copy.
3)    Our sales team will arrange to express the gift to your address and support you for customs clearance.
In the past year 2017, we got a lot of repeat orders from our old clients for solids control equipments and drilling waste management equipments, also we got new orders for oil sludge separation system from our new clients. We got a lot of new equipments available to use for our operations. Including:
Sludge vacuum pump: it can be used to transfer drilling cuttings or oil sludge, it can be replaced one unit of screw conveyor, it still need another set screw pump to be installed slantly to feed to the vertical cuttings dryer or you can buy a unique designed collection hopper to connect with the vertical cuttings dryer.
Oil sludge separation system to be installed in the refinery, to get pure oil, water and dischargable solids.
Composite material shaker screens for GN OEM shale shaker, replacement shaker screens for Derrick, Swaco Mongoose, Brandt Cobra, FSI, etc.
Centrifugal degasser instead of vacuum degasser, which is used to separate harmful gas from the cut in mud.
Your feedback is very important for GN solids control, we will keep improving our products quality, service and design, so we will look forward your customers feedback form signed. Hope in the future we could provide better service and solution for your projects, we aspect long term cooperation relationship with all the clients.

Dredging slurry separation system/ Industry waste water treatment is one of the applications of GN solids control, except for solids control system, drilling waste management system, oil sludge treatment system, horizontal directional drilling system, core bed methane drilling, geothermal well drilling, water well drilling.

The basic working principal is that the dredger will take the contaminated sediment toxic and non-toxic element, and sludge from the big environmental dredging of pond revitalization, the sludge will be pumped by the submersible slurry pump to the dredging slurry separation system, which will separate the solids from the water as much as possible. The dredging slurry separation process including:
First step cleaning: shale shaker, to separate the solids bigger than 100 microns from the water, we will metal slit screen or complete composite screens to separate the big solids, like bricks, garbage, branch, rocks, etc. For a 1000gpm sludge separation system, we will use 2 units of GN 4 panel shale shaker. But the shale shaker may not be necessary when there is no big solids and all of the particles are smaller than 100 microns, it will be useless.
Second step: desander cone with bottom shale shaker to separate the solids between 45 microns to 100 microns, 2 ea of 10 inch desander cone is sufficient for 1000gpm treating capacity.

Third step: 4” desilter cone with bottom shale shaker to separate the solids bigger than 20 microns, 12 ea of 4 inch desilter cone is enough for 1000gpm treating capacity.
The fourth step: 2” desilter cone with bottom shale shaker to separate the solids bigger than 10 microns.
Continue reading →

GN solids control produce drilling cuttings transfer system based in China, Beijing, there are 2 options for drilling waste transfer, one is the vacuum pump, the other one is the screw conveyor system. The vacuum pump with advantages of cheaper price, no need electric power consumption, and compact design, which is the ideal equipments to transfer the drilling cuttings, oil sludge, oil contaminated solids, etc. But for high viscosity oil sludge, it will be difficult to use vacuum pump to transfer from the waste pit to the premixing system, but for drilling cuttings, the vacuum pump works very well, pls refer to GN website to watch the working video of the vacuum pump.

The screw conveyor system can transfer the cuttings with less moisture only, if with too much water/ oil mixture fluids, the fluids will flow back to the waste pit or spill out of the conveyor, because mostly the screw conveyor is installed slantly. And the same time, the screw conveyor need a large area to install, sometimes the area in the rig site is very limited to install the screw conveyor system, also considering the power consumption and cost.
The operation of the vacuum pump need an air compressor, which can be also used to run the decanter centrifuge VFD control panel. All the VFD control panel is positive pressurized variable frequency drive, with the cooling tube installed on the side.

The vacuum pump can suck the solids/ cuttings/ oil sludge from the waste pit up to 50m, distance up to 100m, the max solids is up to 75mm( 3 inch). The max transfer capacity of this model is 40m3/h, the 10m3/h model and 18m3/h model is also under production.
Welcome to visit GN facility in Beijing, China and see the working video of the vacuum pump.

As a responsible company, GN solids control produce environemental protection equipments for drilling fluids recovery, drilling waste management,oil sludge treatment, waste water treatment, etc. We are authorized as National High-Tech Enterprise since 2016, we improved our previous painting workshop machines recently and fully comply with the latest national environmental requirements, which will help us to improve the our equipments painting and coating quality, and improve our delivery time. The major machines including:

Automatic ball blasting machine:
Constant temperature dustless airless spray:
Electrostatic powder line:

GN solids control is the only solids control manufacturer who owns our own ball blasting machines, we can control the quality better. The most important process for shale shaker / mud cleaner deck anti-corrosion is bottom material treatment and painting. After GN ball blasting, degree SA2.5, life time for anticrossion is 10~15 years.
Difference between sand blasting and ball blasting is as below:

Sand blasting function: derusting, remove the oxide coating on the surface
Ball blasting function:
1. derusting, remove the oxide coating on the surface
2.Improve the roughness on the surface
3. remove the burr of the parts
4 Eliminate stress of the part
5 reduce the Deformation of the parts after heat treatment
6 Improve the Wear resistance and Compression capability on the surface
Generally speaking, ball blasting is with better quality than sand blasting, and difficult to achieve. So GN shale shaker with longer time for anti- corrosion compared with other brand shale shaker. The composite material frame shaker screen has longer working life compared with traditional steel frame shaker screen, and the effective screen area is 20% bigger than steel frame shaker screens. The drilling fluids touch parts shaker deck are made of stainless steel 304, which is anti-corrosion.
Welcome to visit our facility in Beijing, China and check our new painting workshop.

This week GN solids control shipped 2 sets of containerized drilling waste management system to Russia client, totally we have over 10 units of such system working in Russia, the unique design is because of the low temperature in Russia area. The container with heating material to keep the equipments warm and can work smoothly, otherwise the equipments will stop working or damage the explosion proof motor when the temperature is lower than – 40℃.
The main equipments of the drilling waste management system for oil based drilling waste is vertical cuttings dryer, also called vertical G dryer. The other equipments list including：

40ft standard container with door and windows
Flushing pump for vertical G dryer
Mud recycling tank with mud agitator
Centrifuge feeding pump (10HP positive displacement pump) to feed the collected fluids to the decanter centrifuge which is installed outside the container.
The screw conveyor to transfer the discharged solids from the vertical cuttings dryer to cuttings collection box
And other accessories inside the container, like washing platform with clean water pipeline connecting port and cabinet for tools and small wear parts storage.

cof

GNLW363CG-VFD decanter centrifuge is the most popular model centrifuge to equipped in the drilling waste management system with max treating capacity 40m3/h, normal working capacity The vertical cuttings dryer can be fixed speed to keep the smooth working speed and G force, but the decanter centrifuge must be variable frequency drive with positive pressurized VFD control panel, the inverter brand is world famous brand ABB, the other electric components are Schneider, Simens, etc.
The decanter centrifuge collection box material is SS304, the bowl material is made by centrifugal casting of duplex stainless steel 2304, which is much better than SS316L.
If you need such customized design drilling waste management system, pls contact with GN solids control.

This week GN solids control shipped 2 units of chemical dosing system with 2 big bowl big volume decanter centrifuge to our Singapore Clients for TBM waste mud treatment. This is not the first time for GN to ship such dewatering unit to Singapore for TBM waste water treatment project, several years ago we shipped another unit of containerized dewatering unit with decanter centrifuge installed inside 20ft container for convenient shipment, operation and rain proof.

GNLW553C-VFD decanter centrifuge is a 22 inch bowl diameter centrifuge, this is not the largest centrifuge GN can produce, we also have GNLW764-VFD with 30 inch bowl diameter centrifuge, it can be used for Tunneling project when huge amount water/ sludge is required for the operation.

The working principal is as below:

The chemicals are added in the chemical dosing system and mixed, then the dosing pump will transfer the chemicals to the decanter centrifuge feed tube, the chemicals will be added to the waste water/ waste sludge from the TBM and after treatment, the ultra fine solids will be separated out from the waste water so they can be reused for the TBM operation. The centrifuge mechanical separation cut point is 2~5 microns, if most of the solids inside the waste water is smaller than 2 microns, it is hard to separate out them, you have to add flocculant to make them flocculation and easy to be separated by the high speed decanter centrifuge.

The max rotary speed of the decanter centrifuge is 2500rpm, it can be adjusted by the VFD control panel with PLC smart control. The normal operation speed is 2200rpm. The dewatering unit /chemical dosing system are installed inside 20ft container for convenient operation, maintenance, and rain/ sun proof.

Continue reading →

Recently GN solids control engineer is working in the jobsite of the USA client for construction industry for the slurry separation system installation and first time commissioning. We have branch company in Houston, USA called GN Solids America LLC, we will responsible for the after sales service and pre- sales service and money collection, we also have spare parts in stock to meet the client’s operation requirement. Once there is any trouble shooting in the jobsite, the client can call GN directly to get the immediate service.

The client totally bought 2 sets of such slurry separation system with the same technical configuration. The equipments below are composed in the system.
1)    Trash collection hopper to collect the waste slurry
2)    Coarse screen separation shale shaker

3)    High G force drying shaker
The drying shaker is a 4 panel shale shaker with high G force up to 8.0G, the composite material shaker screen lasts longer working life and better performance.
4)    Mud cleaner
The mud cleaner is the combination of the desilter cone and bottom shale shaker to separate the fine solids from the slurry.
5)    Big bowl big volume decanter centrifuge: The 22 inch bowl diameter decanter centrifuge max treating capacity is 110m3/h for clean water, the normal treating capacity for drilling fluids treatment is 90m3/h, for slurry separation with chemical dosing system, the treating capacity will be reduced a lot based on different slurry conditions.

Not only for oilfield drilling fluids recycling system and drilling cuttings treatment, GN solids control equipments can be also used for no dig trenchless industry, like HDD, CBM, Geothermal drilling, water well drilling, we also design customized slurry separation system for construction industry, like TBM, Bore pilings, tailings cleaning, etc. Welcome to contact GN solids control or GN solids America for a quotation.

The trailer mounted mud cleaning system in UK can be used for many different applications, including geothermal drilling, water well drilling, horizontal directional drilling, CBM drilling, all kinds of water solids separation project and construction sludge separation system. The technical configuration is as below:

1)    2 mud tanks are installed on the trailer, the total height of trailer plus mud tank system can meet the road transportation limit in Europe. The 2 mud tanks are connected by bottom balance pipeline to keep the mud level in balance and when one mud tank is full, it can flow to another.
2)    The shale shaker, mud cleaner and decanter centrifuge are installed on the mud tank.
The 3 panel shale shaker with 3pcs shaker screens total area 2.63m2, each screen dimension is 700x 1250mm, the composite material frame shaker screen last 20% longer lifetime than previous steel frame shaker screen.
The 3 panel mud cleaner with desander cone, desilter cone and bottom shale shaker, total treating capacity 500gpm. The working principal is as below:
One feeding pump feed the drilling fluids to desander cone inlet pipe, the clean fluids are discharged from the desander outlet pipe and drop into the mud tank. The solids are separated out from the desander nozzle and drop down to the shaker screen, the big solids are separated out from the shaker screen and useful fluids will pass through the screen opening and drop into the mud tank.
Then the desilter feeding pump treat the fluids again by the same way.
High speed decanter centrifuge with separation cut point 2 ~3 microns, the normal working speed is 3200rpm, the max speed is 3900rpm, normally mud recycling system do not install decanter centrifuge, only when after many year operation, the drilling fluids accumulated many fine solids which can not be reused again or when the drilling is finished, the operator need to clean the tailings.

This week GN solids control shipped the second batch of solids control equipments to Ukraine for 16 drilling rig project. The total quantity of the project requirement is as below:
1)    horizontal decanter centrifuge, 30 units
2)    linear motion shale shaker and linear motion mud cleaner, over 30 units
3)    vacuum degasser, 6 units

These equipments will be shipped by 4 batch, this is the 2nd batch. All of them are our major solids control equipments, which have been proved to be good quality, good performance and competitive price.
We also have another type of degasser-centrifugal type degasser which is very popular in Russia market, the features of centrifugal degasser is compact design, easy maintenance, high efficient. The vacuum degasser is a horizontal type degasser with steady operation performance, no need jetting pump compared with Derrick type vacuum degasser.
We have fixed type centrifuge and VFD decanter centrifuge, the client choose fixed speed centrifuge for oil & gas drilling rig, if the client use the centrifuge for drilling cuttings treatment and dewatering unit, the VFD decanter centrifuge is applied.

The linear motion mud cleaner with 1000 gpm treating capacity, 2 ea of desander cone and 12 ea of desilter cone. The bottom shale shaker model is same with the linear motion shale shaker, the client only need to make stock for one dimension shaker screens.

The linear motion shale shaker is 3 panel shale shaker with durable composite material frame shaker screen. GN solids control produce the shaker screen by our own factory to keep the goods quality and fast delivery time. Our shaker screen wire mesh configuration has passed API RP13C test by authorized third party company in USA, all the shaker screens bigger than API 50.

Welcome to send us inquiry for your drilling rig solids control equipments requirement.

This week we shipped mud gas separator and waste collection box to Sinopec.
The mud gas separator normally installed before the solids control system and on the trip tank skid together with chock manifold. Right now all the oil well drilling and mining drilling require mud gas separator to avoid kicking off, sometimes they also need a flare ignitor device. Several month ago GN solids control also shipped one set of mud gas separator and one set of flare ignitor to Indonesia.

Another product is the waste collection box / container with PLC smart control which is used to collect the drilling waste cuttings or oil sludge waste from the rig site. The function of the PLC smart control is as below:

1) The motinoring system to monitor the leakage on the discharge port
2) Warning system for loading the waste within the limit of the environmental protection law as per the gravity sensor
3) Electrical automatic sliding cover performs well on sealing for leakage when closed
Both of them will be used in the rig site, the mud gas separator is used before solids control system, the waste collection box is used to collect the cuttings from the solids control equipments.

As a professional solids control equipments and drilling waste management equipments( both oil based mud and water based mud) manufacturer in China and Houston , GN main products including:
Solids control equipments: decanter centrifuge, linear motion shale shaker, linear motion mud cleaner, desander, desilter, vacuum degasser, centrifugal degasser, mud agitator, centrifugal pump, mixing hopper, mud gas separator, flare ignitor, mud gun, slurry pump, shaker screens
Drilling waste management equipments: vertical cuttings dryer, decanter centrifuge, screw conveyor, screw pump, high G drying shaker
Vacuum pump, Oil sludge separation system, TDU, Dewatering unit, solidification unit, drilling waste collection box, etc.