Last week GN solids control showed our composite material shaker screens in Jakarta, Indonesia for the oil show OGI 2017 successfully.

The shaker screens we showed at OGI 2017 as below:
1)    Replacement shaker screen for Swaco Mongoose PT, composite material frame
2)    Replacement shaker screens for Brandt King Cobra, composite material frame
3)    Replacement shaker screens for Derrick 500 series shaker, pyramid type
4)    Replacement shaker screens for Derrick 500 series shaker, flat type
A lot of clients showed their interests in our shaker screens, including oil & gas drilling contractors, oil companies.
The clients also interested in GN oil sludge treatment system and Thermal Desorption Unit, and GN drilling cuttings treatment system. GN solids control mainly focus on the manufacture of oil drilling solids control system and drilling waste management system.

The oil sludge treatment system and TDU is mainly used for the oil waste from the refinery oil tank bottom cleaning , oil waste pit in the rig site, etc. The unique design with compact design and proper treatment process made the oil sludge treatment system very popular during the oil waste treatment contractors.
GN drilling waste management system including the vertical cuttings dryer, decanter centrifuge with feeding pump for oil based drilling cuttings treatment, high G drying shaker , decanter centrifuge with screw pump, mud tank for water based cuttings treatment system. We also showed our international case study for the drilling waste management in Russia, middle east , Africa, South America, Indonesia, etc. countries.
We also showed our case study for mud recycling system of CBM, Geothermal drilling, water well drilling, HDD, boring pile, TBM, etc works.
Solids control equipments are our traditional equipments, including shale shaker, mud cleaner, desander, desilter, vacuum degasser, centrifugal degasser, decanter centrifuge, centrifugal pump, mud tank system, mud agitator, mud gun, etc.

This week GN solids control shipped the second unit of sand separation system for construction industry to USA client. The first unit of construction sand separation system was shipped to the same client in June, it is already arrived at the client’s jobsite, our engineer is preparing to do the first time installation and commission service in USA to the client’s jobsite.

Same with the first unit sand separation system, the second set of sand washing system made a little changes.
The technical configuration including the items as below:
1)    GNLW553C-VFD big bowl decanter centrifuge for sand separation, with centrifuge bowl diameter 22inch and length 71 inch, the bowl material is made of duplex stainless steel 2205 or 2304, which is much better than SS 316L. The bearing brand is SKF brand. The decanter centrifuge works together with chemical dosing system to separate the fine solids better and reduce the solids content effectively and the discharged water treated by decanter centrifuge is much more clear and easily for the further waste water treatment after GN sand separation system.

2)    The coarse solids separation shale shaker is used to separate the big solids from the sludge of construction.
3)    The desilter with bottom shale shaker to separate the fine solids with feeding pump to feed to the 4 inch desilter cone. The desilter with 8ea desilter cones with treating capacity 500gpm.

4)    There is a big hopper to collect the waste sludge from the construction industry, then it is pumped by submersible slurry pump to the coarse solids separation shale shaker.
Continue reading →

GN solids America, as the branch company of GN solids control-the headquarter and facility in Beijing, is the bridge to connect the Chinese good quality solids control equipments and spare parts to the North America and South America market. The warehouse address is 6710 windfern road, Houston, The equipments and spare parts in stock are as below:

1)    Replacement shaker screens for Swaco Mongoose, Brandt King Cobra, Venom, FSI, Derrick FLC500, Derrick FLC 2000, OEM shaker screens for GNZS594E shale shaker and mud cleaner. All the screens in stock are composite material frame shaker screens, GN brand shaker screens have passed APIRP13C lab testing and it is produced as per API RP13C standard.
With features as below, GN shaker screens sold very well in South America and USA.

2)    Hydrocyclones of 10 inch and 4 inch, they are the spare parts for GNZS594 mud cleaner, the 4 inch desilter cone is interchangeable with Derrick mud cleaner and desilter.
3)    Other spare parts for GN equipments, like shale shaker, mud cleaner, decanter centrifuge, etc
4)    Equipments, including
GNZS594E-HB shale shaker with 4 panel screen, the screen size is 585x1165mm
GNZJ594E-2S12N mud cleaner with 2 vibration motor of US Martin brand, each with 2.5HP, the G force up to 7.5G and it is adjustable.
GNLW363CG and GNLW363CG-VFD decanter centrifuge, with 30m3/h treating capacity for drilling fluids, it can be used for drilling waste management, solids control drilling fluids treatment, waste water treatment, solids separation, etc.
Vertical cuttings dryer GNCD930D, which is specially used for oil based waste treatment, working with screw conveyor, screw pump and decanter centrifuge.

And Jet mud mixer, mud gun, mud agitator, etc.
If you have requirement for our equipments and shaker screens urgently, pls contact with GN SOLIDS AMERICA, also welcome to visit our factory in Beijing, China.

This weekend GN solids control go team traveling at the end of Summer in the Fengning grassland, all the employees in China right now participate in the traveling, some of the employees are still working aboard for installation, commissioning and sales in the branch company. All the department including international sales, domestic sales, technical dept. ,production dept., PMC dept., etc for both headquarter and the second facility.

This is not the frist time for team traveling organized by GN solids control, every year GN solids control teams will go traveling in domestic and abroad. At end of March, GN international and domestic sales dept. go traveling in Thailand because of hard working and good sales.
Even though the international crude oil price lower down a lot during the 2 years, all the projects goes very slow or cancelled, the main sales including oil & gas drilling solids control system, drilling waste management system, oil sludge separation system for refinery oil tank bottom cleaning, HDD and CBM mud recycling system, bored piling desander unit, shaker screens, shale shaker, decanter centrifuge, vertical cuttings dryer, mud cleaner, centrifugal pump, mud agitator, mixing hopper, mud tank system.

This month we just shipped several sets of mud tank system to our international client and domestic client, to ship the order in time as per the agreed delivery time, our workers have been working by 2 shifts and keep working without holiday, so the company decided to organize the team traveling after the big projects are shipped out to let the employees take a rest.

Shaker screens sales amount increased a lot this year, especially for composite material frame shaker screens. After testing the shaker screen samples, the clients repeat order for replacement shaker screens for SWACO Mongoose shale shaker. Welcome to send us inquiry if you have any requirement.

Recently GN solids control release a new shaker screen promotion plan, which has been published in our official website, for more information, pls refer to here:
GN Shaker Screen Points Reward Program

The main purpose for the promotion plan is that to introduce our good quality, competitive price shaker screens to our clients, most of these clients are drilling companies, who will use shaker screens for their daily operation, their huge requirement of shaker screens lead them to control the purchasing cost to lower their drilling total cost, because their client also cut their budget and offer them less price for the drilling operation. GN own advanced production technology of composite material shaker screens, the screen frame is composite material, the screen wire mesh material is stainless steel 304 or 316L. GN composite material frame screen has passed the API RP 13C lab testing of third party in USA.
The content of GN promotion plan of composite material shaker screens is as below:
1)    All the clients who bought GN composite material shaker screens can apply for the screens point reward program. No matter for the OEM screens of GN brand shale shaker or replacement shaker screens for other brand shale shaker.
2)    Each piece screen purchasing equals to one point, the accumulated bonus points could be used as part of the cost, up to US Dollars 15,000, of the equipment. The drilling companies need to replace their solids control equipments once the old equipments are too old to treat the drilling mud well, like shale shaker, mud cleaner, decanter centrifuge, etc. But the purchasing order with discount over 10% is excluded with the promotion plan. You can get either award for the shaker screen purchasing.
3)    The clients purchased from GN Solids America LLC in Houston, TX also can participate in the promotion plan.

GN solids control will show our composite material frame shaker screens at Oil & Gas Indonesia 2017 in Jakarta, Indonesia. This is not the first time for GN to participate in this oil exhibition, we start to show our solids control equipments from September, 2013.

We will show the replacement shaker screens as below:
1）    Replacement composite material shaker screen for Swaco Mongoose PT
2）    Replacement composite material shaker screens for Brandt King Cobra/ Venom brand shale shaker
3）    Replacement shaker screens for Derrick FLC 500 Flat and Pyramid type

1)    Replacement shaker screens for Derrick FLC 48 x 30, Hyperpool pyramid
2)    Replacement shaker screens for FSI shaker
3)    Replacement shaker screens for VSM 300 scalping, primary, first layer
4)    Replacement shaker screens for D-380
5)    OEM shaker screens for all the models of GN brand shale shaker, including GNZS703, GNZS594E, GNZS752, GNZS706, etc.

GN solids is the top shaker screens manufacturer in China who get the API RP13C lab testing report this year by testing the wire mesh configuration, conductance, screen hole opening, etc.
For potential clients who is big drilling companies, we will provide free samples to test before order. Pls contact with GN solids control sales engineer before order.
GN new technology of composite material shaker screens has the advantages as below:
1)    Longer storage time without getting rusty with composite material frame
2)    Longer working time and repairable with plugs when it is a little damaged, the wire mesh is stainless steel material, SS 304 or SS316L, it is depends on the client’s different requirement.
3)    Better separation performance: the screen opening is correct and the wire mesh thickness is the most important issue for wire mesh.
4)    Longer effective screen area for better working performance.

This is the first time for GN solids control to show our shaker screens at SPE Offshore Europe 2017 Exhibition.
The generation information of the exhibition is as below:

Show Name: SPE Offshore Europe Conference & Exhibition
Show date: Sep. 5th to 8th, 2017
Show address: Aberdeen, UK
Stand No.: 5A25
GN solids control will show our core products- shaker screens at the show. Even though the oil & gas drilling activities slowed down in the past years, shaker screen is the most consumpable wear parts of the shale shaker, the drilling companies need to use shaker screens every day, GN focus on the shaker screens technology improvement and marketing. We will send some screen samples to our potential drilling companies clients for testing before order.

We can produce OEM shaker screens for our own shale shaker GNZS703, GNZS594E, GNZS752, GNZS706 and the mud cleaner, also we can produce replacement shaker screens for other brand shale shaker, including FSI, KPT, Derrick FLC 500, FLC 48x 30, Brandt King Cobra, Venom, VSM 300, Swaco Mongoose, etc.
The possible failures of bad quality screens as below:
1) Rubbers not suitable for oil based drilling mud and not heat resistant for the high temperature drilling fluids
2) Wire mesh is easy damaged, working life is very short, need to be replaced frequently
3) Rubber sealing is not good , easily leakage of drilling mud
4) Screen dimension incorrect, can not install it on the shale shaker properly
5) Shaker screen frame working life is not very long, easy to break
6) Separation cut point did not comply with API RP 13C regulation, can not meet the drilling requirement by using the same API mesh
7) Effective screen area is not big enough, so it will influence the treating capacity
GN shaker screen has solved the problems above, welcome to visit GN stand to know our shaker screens.

This week GN solids control shipped one set of 1000HP rig solids control system to Romania.
The technical specs are as below:

5 sets of container sized mud tanks, with safety guard handrails, walkways, stairs, valves, flexible connection.
3 units of shale shaker
1 unit of mud cleaner
1 unit of vacuum degasser
2 units of desander desilter feeding pump
2 units of mixing pump
2 sets of mixing hopper
20 units of mud agitator

1 set of ATEX, CE certified electric control system to control all the motors in the solids control system, and explosion proof cables, gland, starters, motors
The mixing pump, charging pump, feeding pump all with the same model centrifugal pump, all the spare parts are replaceable with Mission Magnum pump.

All the compartment with proper size mud agitator except for sand trap.
Recently we have several mud tank systems under construction, the workers have to working hard by 2 shift everyday to finish the production, through the proper management and arrangement, we finished the order on time.
The shale shaker and mud cleaner bottom shaker has the same model shaker, we produce our own shaker screens for our shale shaker. Our composite material shaker screen dimension is replaceable with Swaco Mongoose PT shaker screen. The composite material screen has longer working life and larger effective screen area, better separation performance, the composite material frame is thinner than metal frame, so the effective screen area became larger.

Continue reading →

Several month ago, GN solids control shipped 2 sets of oil sludge separation system to Middle east client, now the oil sludge separation system has been installed successfully in the client’s site.

The complete oil sludge separation system including:
1)    Pre-mixing unit
The function of pre-mixing unit is increase the flowability and lower the viscosity of the oil sludge through the agitating and heating line, the boiler can provide the hot steam to the heating lines to heat the oil sludge. The oil sludge is storaged in the waste pit and it is transferred by vacuum pump to the pre-mixing tank. But the client needs a air compressor for the working of vacuum pump.

2)    Shaker tank unit
The shale shaker is special designed with cover to avoid the oily sludge splashing and there is hot water spray line to spray hot water to the shaker screen, to prevent the shaker screens from blocking, which will make the shale shaker working better.
3)    Decanter centrifuge separation unit

We provide different model decanter centrifuge with different treating capacity with oily sludge, right not we have 10m3/h decanter centrifuge and 20~25 m3/h decanter centrifuge. The VFD control panel is installed on the telescopic skid with the screw pump. The static mixer is used to mix the chemical before feeding to the centrifuge feed pipe.
4)    Chemical dosing unit
The chemical dosing unit is installed in the 20ft container for convenient operation and shipment.
5)    3 phase separation unit
The 3 phase separation unit including slant plate clarifier, gravity type oil water separator and micro bubble type oil water separator. The clear water and clear oil is flow to the water buffer tank and oil buffer tank. The water pump and oil pump will transfer the water and oil to the storage tank automatically once it is reach the setting value.

As a professional manufacturer of centrifugal pumps in China, GN solids control can produce replacement spare parts for Mission Magnum series centrifugal pump.

Welcome to contact with GN solids sales to get the explored view and part number for the spare parts inquiry.
The centrifugal pump with the spare parts are the most consumpable parts for the solids control system, it can be worked as trip pump, super charging pump, mud cleaner feeding pump, centrifuge feeding pump, vacuum degasser jetting pump, transfer pump, mixing pump, etc.With the features below, it has been widely used for oil & gas drilling solids control system, horizontal directional drilling mud recycling system, core bed methane drilling mud cleaning, geothermal drilling, water well drilling, sludge separation system, mining solids removal unit, etc industries.
1)    Cost effective, steadily working compared with screw pump, low cost to get the wear parts
2)    Easy maintenance, easy operation, easy to source the spare parts, standard design
3)    Flexible to install on the mud tank, have no strict requirement for the installation conditions, for example, it can be installed under the sand trap, on the tank skid, besides the hopper or directly on the ground with skid and control panel on it.
It also has disadvantages for some special applications as below:
4)    Horizontal installed, it takes much more area on the mud tank compared with vertical installed pump, like submersible slurry pump
Continue reading →