GN solids control just finished the mining exhibition successfully at EXPOMIN 2016 in Santiago, Chile last week, we displayed the baby centrifuge at the show, this is the first time for GN to attend EXPOMIN together with our exclusive representative SL Group oil & Mining solutions. A lot of clients showed their interests to our baby centrifuge, which is specially designed for diamond core drilling. We introduce the mini mining centrifuge to the mining market with the purpose as below:

1 reduce water consumption , especially when water is very expensive

2 Reduce total drilling cost

3 Save the total cost of solids disposal

4 Environmental friendly, to be a responsible company to the local resident

In some sites only a baby decanter centrifuge is not enough, we need the baby shale shaker to separate the big rocks firstly and reduce the solids content and make the solids dryer, so the centrifuge can work better and the solids discharged will be much drier. The humidity of the discharge solids can be adjusted by the adjustment plate on the big end of the mini centrifuge easily.

The dryness of the mud cake is acceptable by most of the clients, they can use the truck or cuttings box to transfer the solids directly or dump them directly. The discharged fluids will be reused to save the cost. The water is not clear enough for drinking, the separation cut point is 2~5 microns, most of the solids smaller than 2 microns will remain in the water.

The complete solids removal unit is also welcomed by the potential clients, they like the compact design much. We have the baby centrifuge in stock in Santiago for sale, and not only for sale, we also provide rental service for short period projects. Continue reading →

GN Solids Control is usually leading manufacturer of shale shaker, centrifuge, vertical dryer, mud agitator, shear pump, mud mixing system, Mud Gas Separator etc… all line of solids control and all line of drilling waste management equipment. To present better support to end consumer client, we stock a lot of solids control equipment coming from last year. But now the essential oil industry is drilling down and all sorts of equipment is stock there. To be able to sell them soon along with recycle the cost, the price is more preferable now to both the actual client and GN Solids Control.

GN Solids Control as the first China API certified supplier, GN Solids Control product is with high top quality and good price. In addition to, GN centrifuges and usable cuttings dryers and mud agitators have been tested by means of many international oil drilling companies or oil services companies.

1) If you want to get more information on GN solids control gear, pls visit GN Solids Control at CIPPE olive oil show, or at NON-PRESCRIPTION oil show, or on Iran oil show. You will take our solids control equipment there to meet a lot more clients. CIPPE oil present is coming at 29 to be able to 31, March 2016. OVER THE COUNTER oil show is coming in 2 to 5, May 2016 and Iran oil indicate is also coming at May possibly. Pls contact us if you want to appear. Pls send email for you to: roy@gnsolidscontrol. com .

2) In case you have enough time, we also pleasant you to come to GN manufacturing. Our factory is close to Beijing, Capital of China. We can easily arrange hotel accommodations, air port pickup for clients. With GN factory, we can communicate more at GN solids control office, visit GN fabrication workshop, GN share house…etc.

3) With the sector becoming warmer, more and more customer starts to inquiry regarding centrifuge. Especially centrifuge to get solids control mud system or drilling waste management. The 14inch bowl measurement mud treatment centrifuge, it is equivalent to US brand centrifuge and have a good market share by now. Pls contact us freely if you want some solids control products.

GN Solids Control Company is ready to distribution one set 750Hp computer drilling mud system to customer. The client is local clientele focus on oil drilling sector. GN Solids Control have touch with them for over some years. And the client only purchase small items in prior years to test the quality of GN product. The small items include things like one set shaker, a few shale shaker screens, some value packs of mud agitator, several centrifugal pumps etc . Finish of last year, the client relieve big order for full set of 750hpr rig drilling mud system.
The solids control mud cleaning system including beneath items.
1) 4 units 40ft container size mud tank.
1 set mud tank as mud recycling where possible tank, 1 set mud tank as mud mixing system tank and the other a couple of tanks as mud safe-keeping tanks. The container dimension tank with locking pit is easy for transportation through 40feet long vehicles.

2) 2 sets GNZS703E-HB shale shaker
Your client chooses to use 3 panel shakers to save cost about shaker screen utilize. That model shaker is also older product and has been discussing oil drilling for over your five years, quality is very very good and feedback is always satisfied.
3) 1 set GNZJ752-2S mini desander & a single set GNZJ752-12N mini desilter
GN mini desander as well as desilter is combination of little shaker (GNZS752 mini shale shaker) with desander cones or desilter cones. The particular mini unit is very sleek and stylish and cost-effective.
4) GNLW452C decanter centrifuge
GN decanter centrifuge is usually popular at solids control field and drilling squander management field. With more than 200sets centrifuge sales quantity, GN decanter centrifuge will be occupy more market share coming from US/Europe brand.
Other solids control product including: mud hopper, mud agitator , centrifugal pump, and so on If you already have complete pair of mud system and need to switch the old products, pls in addition contact us and we can provide almost all replacement items for consumers.

Recently we shipped 2 sets of linear motion shale shaker and 1 set of linear motion mud cleaner to Middle East. This is a 2 mud tank system, one mud tank is with only one unit of linear motion shale shaker, the other tank is with 1 unit of linear motion shale shaker and 1 unit of linear motion mud cleaner. The processing rate of the system is 500gpm. This is not our standard design, this is customized design for the slow oil industry client.

GN mud recycling system/ solids control system can be applied for all kinds of drilling when you need to clean and reuse the drilling mud. We are the drilling fluids cleaning and disposal specialist for water based mud, oil based mud and synthetic based mud.

We have supplied solids control equipments, drilling waste management equipments and mud recycling system to middle east clients in the past years. Sometimes they will buy the equipments from us only, and make the mud tank locally to save freight cost. Some clients need a mud system easily movement, they will buy the skid mounted mud tank from GN, and installed in on their own trailer, together with the other components, for example, generator, pipelines, transfer pumps.

The second mud tank with a centrifugal pump as transfer pump,The first mud tank with 3 sets of centrifugal pump, 2 of them as feeding pump of the desander cone and desilter cone, 1 as the mixing pump with the mixing hopper unit and shearing unit.

If you need a mud recycling system for water well drilling/ water injection well drilling, geothermal well drilling, diamond core drilling, Coal bed methane drilling, Horizontal directional drilling, shallow oil & gas drilling, deep water drilling, deep oil drilling, pilings, Tunneling, construction work, etc, pls contact with GN solids control.

Recently we shipped 3 phase cleaning mud recycling system for no-dig projects again, we ever shipped the same mud system to the largest pipeline crossing contractors last year.

The 3 phase cleaning mud recycling system is different with the traditional 3-phase cleaning system- shale shaker as the first phase cleaning, desander cone as the second phase cleaning desilter cone as the third phase cleaning. Our system with desander cone as the first phase cleaning, desilter cone as the second phase cleaning, middle speed decanter centrifuge as the third phase cleaning. This is mainly used for drilling fluids with low gravity solids. Along with the drilling depth and time, the ultra fine solids accumulated in the drilling fluids which can not be separated by the desilter cone, middle speed decanter centrifuge is used to reduce the solids content in the drilling fluids for reuse the drilling mud, otherwise it can not meet the drilling required technical parameters.

We also have high speed decanter centrifuge and variable speed centrifuge for option, why we use middle speed decanter centrifuge only? Because the middle speed decanter centrifuge with separation point 5~7 microns which is enough for the HDD application, and the price is much cheaper compared with the high speed decanter centrifuge.

The container sized frame on top of the 20ft standard container size mud tank for convenient movement between different jobsites. Both of the desander and desilter  with bottom shale shaker for drying the discharged solids and recycle more useful drilling fluids.

Continue reading →

GN Solids Control, a top manufacture of complete line of solids control equipment, manufactures and supplies 1 model of Mini Centrifuge.

In this article, we will mainly introduce the knowledge about this model of Mini Decanter Centrifuge.

1).Main Application

Firstly, we need to know this model of centrifuge is very mini.

l  Drum Diameter: 9inch;

l  Drum Length: 26inch;

l  Max Capacity: 40GPM;

l  Effective Capacity: 26GPM;

Compared with the other manufactures in China, the types of centrifuge that GN Solids Control could provide are the most complete, the range is from the max capacity 484GPM to the mini capacity 40GPM.

Mostly, the centrifuges with big capacity will be used in the Oil & Gas drilling field, mainly be used for treating the drilling fluids or treating the drilling waste management  and the price is expensive.

This model of Mini Centrifuge will be mainly used in the industries like “Mining Industry”, “Diamond Core Drilling”, “Industrial waste water treatment”, etc. As in these industries, the needed capacity is small, the Mini Centrifuge could perfectly meet the practical need and it is economical and practical.

2). Key Features

l  Effective Capacity: 26GPM;

l  Max Drum Speed: 5000RPM;

l  Typical Drum Speed: 3800/4500RPM;

l  Cut Point: 2-5μm；

Although it has a small footprint, it is still a high-speed centrifuge. The highest speed is 5000RPM and the cut point is 2-5μm. To the very fine solids particles, they could be perfectly separated out by this mini centrifuge.

For treating the industrial waste water, treating the drilling fluids in diamond core drilling, its powerful strength will be showed.

3). Key Advantages

l  Product performance has been tested: only in USA and Canada, GN has sold over 17 units of this mini centrifuge;

l  Centrifugal casting process with the drum, which is the best manufacturing process with the high-speed centrifuge;

l  All the electrical components and core parts all adopt the products from world-famous brands to guarantee the equipment quality and stable performance. Such as, the bearing are from SKF/NAG brand, the electrical components are from SIEMENS/SCHINEIDER.

Since established in2007 year, GN Solids Control has always followed the philosophy of “good quality & rational price”. Our Goal and Vision is to manufacture good products and create the value for clients.

Finally, if you want to learn more about the mud mixing system manufactured by GN Solids Control, welcome to visit our website and contact us.

Web：http://www.gnsolidsamerica.com

Email：usa@gnsolidscontrol.com

Recently GN shipped one set of 750HP drilling rig solids control system to our client in China. The main configuration is as below:

4 sets of mud tanks

2 sets of GNZS703E-HB linear motion shale shaker

1 set of GNZS752E-2S desander

1 set of GNZS752E-12N mud cleaner with desilter

1 set of GNLW452 decanter centrifuge

Solids control pumps for feeding the desander and mud cleaner

Mud mixing unit including hopper and mixing pump

Mud agitators and mud gun as required

Features of the system:

1. The solids control system including 4 phase cleaning solids control equipments, the first phase cleaning is by shale shaker, the 2nd phase is desander, the 3rd phase is desilter, the 4th phase cleaning is decanter centrifuge.

2 desander and desilter with bottom shaker screens for drying the discharged solids and recycle more useful drilling fluids. In some cases, the client will use desander, desilter without bottom shaker screens, by this way, it is very easy for overflow, then they use a separate shale shaker as the bottom shaker to use after desander and desilter.

3 Separate skid of jet mud mixer to increase the storage volume of the mud tanks, and it is flexible to connect with either tank.

4 The desander centrifuge will not work all the time, it will work temporarily when it is required to separate ultra fine solids, to keep the drilling fluids balance. GNLW452 centrifuge is the cost-effective model centrifuge with middle speed, it is mainly used to barite recovery.

Continue reading →

GN Solids Control has been around on designing and production shale shakers, decanter centrifuges, mud cleaners, desanders, desilters and cuttings dryers for several years. All of GN solids control and oil sludge dealing with equipments or systems tend to be widely used in over sixty countries.
With the profound trustworthiness of GN Solids Control, GN also enjoy growing from a small businesses to a leading global nation during the fast development of solids control industry and essential oil sludge treatment industries.
GN Solids Control equipments are very well known in North America, many local drilling businesses are using GN shakers, centrifuges and cuttings dryers. GN equipments and drilling mud system are also very popular within Europe. Last year, GN Solids Control provided many turnkey mud systems for sludge separation. GN equipments will also be selling very well in The ussr.

Although Russia is struggling with the low oil price, the actual depreciation of Rouble assist to save cost when drilling from some degree. Most of the Ruskies drilling companies can still create profit when the WTI price are near 30 usd/barrel.
Within 2014, GN Solids Control established one Russia part company in Moscow. GN also has one Houston part company which is GN Solids America LLC. GN Solids Russia is devoted to supply the best products with the most competing price. Recently, GN Solids Control has provided many models of shakers and mud cleaners to Russia.
Within Russia market, GN Solids Control has many successful tasks using GN solids control and drilling waste management equipments. Many large businesses such as Baker Hughes are utilizing GN decanter centrifuges as well as cuttings dryers for essential oil base mud and produced base mud. Now GN Solids Control also focusing on developing water base mud separation.
GN modular decanter centrifuge and cuttings dryer are also using widely within Russia as well as some other nations. We believe more and more equipments to be used in Russia and UNITED STATES.

GN solids control will show at Expomin Congress 2016 mining exhibition in Santiago, Chile, we will show our advanced mining decanter centrifuge for diamond drilling waste water recycling. If you are interested to know more about our centrifuge performance and price, pls visit us at the show.
Expomin 2016 general information: ( www.expomin.cl )
Time: April 25~29,2016
Location: Santiago, Chile
Stand No.: 1018-2
To make an appointment with us, pls send your visit schedule to sales@gnsolidscontrol.com.
What equipments we will show?
Mini Decanter centrifuge GNLW223 for mining diamond core drilling waste water treatment, the purpose is to use less water to save the drilling cost, to be a responsible company for the environment after drilling, less the drilling waste and reduce the drilling waste treatment cost. Since the treating capacity required and floor area is both very small, and considering the budget limit, we choose the smallest model centrifuge for this application.

Continue reading →

Shaker screen is type of quick-wear part widely used on shale shaker in drilling process to remove out the cuttings from drilling fluids. There are many shale shaker manufacturers in the world, and in the mean while, they also provide the original shaker screens to matching their own shaker. However, to the screen user, to find a screen supplier who provides replacement screen with cost effective price would be the best choice, as the original shaker screens are always price higher.

All screen manufacturers may have different technology to fabricate the screen. From the wire mesh choosing to glue processing, almost every procedures are different technologies.

Then how a screen manufacturer makes replacement screen for other brands?

It is well known the shaker screens could be made as per Mesh No. and API No. Mesh No. is a designation of ASTM and ISO which means how many holes within one square inch. If you order the replacement screen by telling the Mesh number, it may lead to a mistake as different manufacturer use different diameter steel wires to weave the mesh surface. Though the mesh numbers are same, the size of the hole is different. Thus if you want to order screen by providing the mesh number, you also need tell what size particles you want to separate. It is also called separating point.

On the other hand, API number is a size span of microns; all sizes in this span are classified into one API No. A specified API number means 100% of solids with size in this span will go through the screen panel. On screen performance, API also defined the non-blanked area and conductance. API number is much acceptable to manufacturer when ordering the replacement screens.

Some buyer may bring some famous screen suppliers’ mesh number to other supplier for asking replacement screen price. It should be noted that mesh number only indicates the first top layer wire mesh performance. A better way is to provide the complete screen part number, and then screen manufacturer is able to find the corresponding API number. It will help both the user and supplier to avoid mistakes.

GN Solids Control is a professional manufacturer of drilling mud system and shaker screen. Our capacity of screen is around 5000 thousand piece each month. Replacement screen for many world famous brands could be found in GN’s production line. For more information, no hesitate to contact with us.